Order Products : sales@su-jiao.com
Pharmalene® MP 90 PH
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | Versalis S.p.A. |
| Trademark: | Pharmalene® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | FZnm2S_Pharmalene-MP-90-PH.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Pharmalene MP 90 PH is a homopolymer high density polyethylene (HDPE) with antioxidants obtained by gas phase process. Its production is manufactured according to good manufacturing practices (GMP). The narrow molecular weight distribution and the high density of Pharmalene MP 90 PH make it ideal for injection molding applications where are required high rigidity and resistance to distortion. The polymer during the transformation phase has excellent thermal stability. The main use of the product is in the pharmaceutical industry. The antioxidant additives used are approved by the polyethylene monography of the European Pharmacopoeia and used in compliance with it. The resin formulation is established by years of experience and is not subject to change. Pharmalene MP 90 PH is ideal for injection molding to produce caps, closures, small containers and medical articles requiring high stiffness and hardness. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.960 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) | ISO 1133 | ||
| 190°C/2.16 kg | 7.0 | g/10 min | |
| 190°C/5.0 kg | 20 | g/10 min |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore D, Injection Molded) | 69 | ISO 868 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ISO 527-2 | ||
| Yield, Injection Molded | 30.0 | MPa | |
| Break, Injection Molded | 17.0 | MPa | |
| Tensile Strain (Break, Injection Molded) | 400 | % | ISO 527-2 |
| Flexural Modulus (Injection Molded) | 1450 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (Injection Molded) | 100 | J/m | ISO 180/A |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | < -60.0 | °C | ASTM D746 |
| Vicat Softening Temperature | 128 | °C | ISO 306/A |
| Melting Temperature | 137 | °C | Internal Method |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 190 to 260 | °C | |
| Middle Temperature | 190 to 260 | °C | |
| Front Temperature | 190 to 260 | °C | |
| Mold Temperature | 10.0 to 40.0 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 1000 TFE 15 Z | RTP Company | PBT | RTP |
| Nanguang TPU Y-85AX | Fujian Nanguang Light Industry Co., Ltd. | TPU, Unspecified | Nanguang TPU |
| APEX® RE 8207 OB | Teknor Apex Company | PVC, Rigid | APEX® |
| DISTRUMID 6 GF50 | Distrupol | Nylon 6 | DISTRUMID |
| Elastron® D P.D100.A40.B | Elastron USA, Inc. | SBS | Elastron® D |
