Order Products : sales@su-jiao.com

SureSpec HP-030

Category:	PP Homopolymer , Polypropylene Homopolymer
Manufacturer:	Genesis Polymers
Trademark:	SureSpec
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	FYyerp_SureSpec-HP-030.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
HP-030 is a Polypropylene certified prime grade designed for Extrusion of Water-Quench Cast Film for Slit Tape applications. HP-010 combines excellent processability, very good thermal stability, and high degree of purity with Low Water Carry-over and good balance of tape strength and orientation properties. Recommended processing temperatures of HP-010 are: 1) tape - 210° to 220°C in barrel and 230-250°C in head, and 2) multifilament - 210° to 230°C. HP-010 complies with FDA regulation 21CFR 177.1520 and with most international regulations concerning the use of Polypropylene in contact with food articles.

Message

HP-030 is a Polypropylene certified prime grade designed for Extrusion of Water-Quench Cast Film for Slit Tape applications. HP-010 combines excellent processability, very good thermal stability, and high degree of purity with Low Water Carry-over and good balance of tape strength and orientation properties. Recommended processing temperatures of HP-010 are: 1) tape - 210° to 220°C in barrel and 230-250°C in head, and 2) multifilament - 210° to 230°C. HP-010 complies with FDA regulation 21CFR 177.1520 and with most international regulations concerning the use of Polypropylene in contact with food articles.

General Information
Features	Food Contact Acceptable Good Processability Good Thermal Stability High Purity Homopolymer Low Water Carryover
Uses	Cast Film Tape
Agency Ratings	FDA 21 CFR 177.1520
Forms	Pellets
Processing Method	Cast Film Extrusion

Physical	Nominal Value	Unit	Test Method
Density	0.904	g/cm³	ASTM D1505
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)	3.0	g/10 min	ASTM D1238

Mechanical	Nominal Value	Unit	Test Method
Flexural Modulus - 1% Secant ¹(Injection Molded)	1410	MPa	ASTM D790

Additional Information	Nominal Value	Unit
Processing Temperature
Multifilaments	210 to 230	°C
Tape - in barrel	210 to 220	°C
Tape - in head	230 to 250	°C

Note Message
1 .	1.3 mm/min

Resin Grade	Manufacturer	Category	Trademark
RELENE® 1035FS20	Reliance Industries Limited	LDPE	RELENE®
Toraypef® 30040 AS60	Toray Resin Company	Polyolefin, Unspecified	Toraypef®
Hostaform® S 27064 XAP² ™	Celanese Corporation	Acetal (POM) Copolymer	Hostaform®
PETOPLEN EH 251	PETKIM Petrokimya Holding A.S.	PP, Unspecified	PETOPLEN
SQUARE® LIM6968-30A/B	Shenzhen SQUARE Silicone Co., Ltd.	Silicone Rubber, LSR	SQUARE®