Order Products : sales@su-jiao.com
Horda E8415
| Category: | EVA , Ethylene Vinyl Acetate Copolymer |
| Manufacturer: | Horda Cable Compounds |
| Trademark: | Horda |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | FXwD16_HordaE8415.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Easy Strippable Semiconductive Shielding E8415 is a vulcanizing, easy-strippable semiconductive compound, designed for both XLPE and EPDM rubber insulated cables and use in both dry and steam curing processes. E8415 meets the requirements as below, when optimal processing extrusion and end testing procedure are used: AEIC CS8 (latest edition) NEMA WC 7-1996/ICEA S-95-658 BS 6622 IEC 60502 NF C 33-223 |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.19 | g/cm³ | ASTM D1928 |
| Moisture Content 1 | ppm | Internal method |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Thermoset 2(200°C) | 60 - 80 | % | IEC 60540 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 85 - 90 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | 11.0 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 270 | % | ASTM D638 |
| Aging | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Change in Tensile Strength in Air (135°C, 168 hr) | -5.0 | % | ASTM D638 |
| Change in Ultimate Elongation in Air (135°C, 168 hr) | -50 | % | ASTM D638 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity | ASTM D257 | ||
| 23°C | > 5.0E+2 | ohms·cm | ASTM D257 |
| 90°C | < 1.0E+3 | ohms·cm | ASTM D257 |
| 120°C | < 1.0E+3 | ohms·cm | ASTM D257 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | < 40 | °C | |
| Cylinder Zone 1 Temp. | 60 - 110 | °C | |
| Cylinder Zone 2 Temp. | 60 - 110 | °C | |
| Cylinder Zone 3 Temp. | 60 - 110 | °C | |
| Cylinder Zone 4 Temp. | 60 - 110 | °C | |
| Cylinder Zone 5 Temp. | 60 - 110 | °C | |
| Die Temperature | 100 - 130 | °C |
| Extrusion instructions |
|---|
| Screw cooling: 40 to 50 °C |
| Note Message | |
|---|---|
| 1 . | QAHC-10420 (Karl Fischer method) |
| 2 . | 20 N/cm² |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| QR Resin QR-1000-GF20 | QTR, Inc. | PC | QR Resin |
| SEETEC PP H7525 | LG Chem Ltd. | PP Homopolymer | SEETEC PP |
| Niche PA66MI40N | Niche Polymer, LLC | Nylon 66 | Niche |
| DuPure® G 72 TF | Ducor Petrochemicals BV | PP Homopolymer | DuPure® |
| SQUARE® SEP8660-70 | Shenzhen SQUARE Silicone Co., Ltd. | Silicone | SQUARE® |
