Order Products : sales@su-jiao.com
XIRAN® IZ0721M
| Category: | SMA , Styrene Maleic Anhydride |
| Manufacturer: | Polyscope Polymers BV |
| Trademark: | XIRAN® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | FXGEVd_XIRAN-IZ0721M.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
XIRAN® IZ0721M is an amorphous thermoplastic random SMANPMI (styrene maleic anhydride N-Phenylmaleimide) terpolymers. XIRAN® IZ0721M is typically added to other engineering plastics to increase:
Application areas XIRAN® IZ0721M is specifically designed as an additive to increase the thermal properties of several engineering plastics especially in styrenic like ABS |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Apparent Density | 0.60 | g/cm³ | Internal method |
| Melt Mass-Flow Rate (MFR) (265°C/10.0 kg) | 70 | g/10 min | ISO 1133 |
| Maleic Anhydride Content - Calculated | 7.0 | % | Internal method |
| Molecular weight- Calculated | 135000 | g/mol | Internal method |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Thermal Stability | 380 | °C | TGA |
| Glass Transition Temperature | 178 | °C | ISO 3146 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 80.0 - 90.0 | °C | |
| Drying Time | 2.0 - 3.0 | hr | |
| Rear Temperature | 230 - 250 | °C | |
| Middle Temperature | 230 - 250 | °C | |
| Front Temperature | 230 - 250 | °C | |
| Nozzle Temperature | 240 - 270 | °C | |
| Processing (Melt) Temp | < 280 | °C |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 80.0 - 90.0 | °C | |
| Drying Time | 2.0 - 3.0 | hr | |
| Cylinder Zone 1 Temp. | 230 - 250 | °C | |
| Cylinder Zone 2 Temp. | 230 - 250 | °C | |
| Cylinder Zone 3 Temp. | 230 - 250 | °C | |
| Cylinder Zone 4 Temp. | 230 - 250 | °C | |
| Cylinder Zone 5 Temp. | 230 - 250 | °C | |
| Die Temperature | 240 - 270 | °C |
| Extrusion instructions |
|---|
| Maximum processing temperature: 280°C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TECHLEN ST910 | DAEHA Co., LTD | PP, Unspecified | TECHLEN |
| SUMILITE® PL-1640 | Sumitomo Bakelite Co., Ltd. | Phenolic | SUMILITE® |
| Dutral® CO 059 | Versalis S.p.A. | EPDM | Dutral® |
| HiFill® PP LGF35 2000 12MM | Techmer Engineered Solutions | PP, Unspecified | HiFill® |
| KMI PP KM-815IB | KMI Group, Inc. | PP Impact Copolymer | KMI PP |
