Order Products : sales@su-jiao.com
EPO-TEK® H73
| Category: | Epoxy , Epoxy; Epoxide |
| Manufacturer: | Epoxy Technology Inc. |
| Trademark: | EPO-TEK® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | FVcwEP_EPO-TEK-H73.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| A two component, high Tg, thermally conductive, electrically insulating epoxy designed for semiconductor packaging including heat sinking, hermetic sealing, and opto-electronic assemblies. A higher viscosity alternative to EPO-TEK® H74. NASA approved low outgassing epoxy. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| RoHS Compliance |
|
| Forms |
|
| Physical | Nominal Value | Unit | |
|---|---|---|---|
| Particle Size | < 50.0 | µm |
| Additional Information | Nominal Value | Unit | |
|---|---|---|---|
| Degradation Temperature | 428 | °C | |
| Die Shear Strength - >10 kg (23°C) | 23.4 | MPa | |
| Operating Temperature | |||
| Continuous | -55 to 250 | °C | |
| Intermittent | -55 to 350 | °C | |
| Storage Modulus (23°C) | 6.04 | GPa | |
| Weight Loss on Heating | |||
| 200°C | 0.13 | % | |
| 250°C | 0.21 | % | |
| 300°C | 0.47 | % |
| Thermal | Nominal Value | Unit | |
|---|---|---|---|
| Glass Transition Temperature 1 | > 100 | °C | |
| CLTE - Flow | |||
| -- 2 | 3.5E-5 | cm/cm/°C | |
| -- 3 | 9.8E-5 | cm/cm/°C | |
| Thermal Conductivity | 0.81 | W/m/K |
| Thermoset | Nominal Value | Unit | |
|---|---|---|---|
| Thermoset Components | |||
| Part A | Mix Ratio by Weight: 100 | ||
| Part B | Mix Ratio by Weight: 4.0 | ||
| Shelf Life (23°C) | 52 | wk |
| Uncured Properties | Nominal Value | Unit | |
|---|---|---|---|
| Color | |||
| -- 4 | Amber | ||
| -- 5 | Grey, Light | ||
| Density | |||
| Part B | 1.02 | g/cm³ | |
| Part A | 2.02 | g/cm³ | |
| Viscosity 6(23°C) | 80 to 100 | Pa·s | |
| Curing Time (150°C) | 1.0 | hr | |
| Pot Life | 150 | min |
| Cured Properties | Nominal Value | Unit | |
|---|---|---|---|
| Shore Hardness (Shore D) | 91 | ||
| Lap Shear Strength (23°C) | 13.5 | MPa | |
| Relative Permittivity (1 kHz) | 5.17 | ||
| Volume Resistivity (23°C) | > 3.0E+13 | ohms·cm | |
| Dissipation Factor (1 kHz) | 8.0E-3 |
| Note Message | |
|---|---|
| 1 . | Dynamic Cure 20-200°C/ISO 25 Min; Ramp -10-200°C @ 20°C/Min |
| 2 . | Below Tg |
| 3 . | Above Tg |
| 4 . | Part B |
| 5 . | Part A |
| 6 . | 2.5 rpm |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| NuSil CV2-2946 | NuSil Technology | Silicone | NuSil |
| AIE PP 80T4 | Asia International Enterprise (Hong Kong) Limited | PP, Unspecified | AIE PP |
| Axiall PVC 9113J Clear 61 | Axiall Corporation | PVC, Rigid | Axiall PVC |
| LNP™ THERMOCOMP™ DX06409 compound | SABIC Innovative Plastics | PC | LNP™ THERMOCOMP™ |
| Pearlthane® 11T85 | Lubrizol Advanced Materials, Inc. | TPU-Capro | Pearlthane® |
