Order Products : sales@su-jiao.com
SABIC® PPcompound 9154
| Category: | PP, Unspecified , Polypropylene |
| Manufacturer: | Saudi Basic Industries Corporation (SABIC) |
| Trademark: | SABIC® PPcompound |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | FVWfgf_SABICPPcompound9154.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
SABIC® PPcompound 9154 is a development grade, elastomer-modified mineral filled Polypropylene for automotive interior applications. This material has been designed to combine a good performance profile with good processing. SABIC® PPcompound 9154 is a designated automotive grade. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Additive |
|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.990 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 18 | g/10 min | ISO 1133 |
| Molding Shrinkage (24 hr) | 0.90 | % | Internal method |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ISO 527-2/1A/50 | ||
| Yield, injection molding | 20.0 | MPa | ISO 527-2/1A/50 |
| Fracture, injection molding | 13.5 | MPa | ISO 527-2/1A/50 |
| Tensile Strain (Break, Injection Molded) | 65 | % | ISO 527-2/1A/50 |
| Flexural Modulus 1(Injection Molded) | 1680 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C, Injection Molded) | 23 | kJ/m² | ISO 180/4A |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 54.0 | °C | ASTM D648 |
| Note Message | |
|---|---|
| 1 . | Method I (three-point load) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Mapex AN4920SN | Ginar Technology Co., LTD. | Nylon 66 | Mapex |
| Sofprene T® 550100A45 | SO.F.TER. SPA | SBS | Sofprene T® |
| Grivory® GV-2 FWA black 9225 | EMS-GRIVORY | Nylon 66+Nylon 6I/X | Grivory® |
| ESTALENE EN 10 SC | Cossa Polimeri S.r.l. | Polyolefin, Unspecified | ESTALENE EN |
| LNP™ THERMOCOMP™ WC003 compound | SABIC Innovative Plastics Europe | PBT | LNP™ THERMOCOMP™ |
