Order Products : sales@su-jiao.com
Safron® C765-15NA
| Category: | PP Impact Copolymer , Polypropylene Impact Copolymer |
| Manufacturer: | Safripol (PTY) LTD |
| Trademark: | Safron® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | FTrK42_Safron-C765-15NA.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Safron® C765-15NA Polypropylene Resin is a high performance impact copolymer developed for injection moulding applications. C765-15NA Polypropylene Resin has an improved balance of mechanical properties featuring outstanding stiffness and high impact strength which is maintained even at low temperatures. Safron® C765-15NA Polypropylene Resin offers an improvement in stiffness over conventional impact copolymers with comparable flow and toughness. It also contains an antistatic additive. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.900 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 15 | g/10 min | ISO 1133 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D, Injection Molded) | 66 | ISO 868 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Yield, Injection Molded) | 26.0 | MPa | ISO 527-2 |
| Tensile Strain (Yield, Injection Molded) | 10 | % | ISO 527-2 |
| Flexural Modulus (Injection Molded) | 1200 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength | ISO 179/1eA | ||
| -20°C, injection molding | 6.5 | kJ/m² | ISO 179/1eA |
| 23°C, injection molding | 12 | kJ/m² | ISO 179/1eA |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature 1(0.45 MPa, Unannealed) | 90.0 | °C | ISO 75-2/B |
| Vicat Softening Temperature 2 | 150 | °C | ISO 306/A |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 190 | °C | |
| Middle Temperature | 220 - 250 | °C | |
| Front Temperature | 250 - 270 | °C | |
| Nozzle Temperature | 240 | °C |
| Injection instructions |
|---|
| Zone 4 Temperature: 260°C |
| Note Message | |
|---|---|
| 1 . | Injection Molded |
| 2 . | Injection Molded |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Bayblend® FR3000 HI | Covestro - Polycarbonates | PC+ABS | Bayblend® |
| DIALAC® EX18T | UMG ABS, Ltd. | ASA | DIALAC® |
| LNP™ VERTON™ MV00ASU compound | SABIC Innovative Plastics | PP, Unspecified | LNP™ VERTON™ |
| LUVOCOM® 50/CF/15/TF/15/SI/2/BK | Lehmann & Voss & Co. | PC | LUVOCOM® |
| Elastocon® 2890 | Elastocon TPE Technologies | TPE | Elastocon® |
