Order Products : sales@su-jiao.com
SMOKEGUARD™ O 405 NATURAL
| Category: | Polyolefin, Unspecified , Polyolefin |
| Manufacturer: | AlphaGary |
| Trademark: | SMOKEGUARD™ O |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | FO8QBV_SMOKEGUARD-O-405-NATURAL.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| A 105°C RATED, FLAME RETARDED THERMOPLASTIC INSULATION AND SPLINE COMPOUND INTENDED FOR COMMNICATIONS CABLE. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.27 to 1.31 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 9.2 | g/10 min | ASTM D1238 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (0.762 mm) | 11.0 | MPa | ASTM D412 |
| Tensile Elongation (Break, 0.762 mm) | 30 | % | ASTM D412 |
| Aging | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Change in Tensile Strength in Air 1(136°C, 168 hr) | 0.0 | % | UL Unspecified |
| Change in Ultimate Elongation in Air 2(136°C, 168 hr) | 0.0 | % | UL Unspecified |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Dielectric Constant (23°C, 100 MHz) | 2.77 | ASTM D150 | |
| Dissipation Factor (23°C, 100 MHz) | 1.1E-3 | ASTM D150 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Oxygen Index (3.18 mm) | 28 | % | ASTM D2863 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 182 | °C | |
| Cylinder Zone 2 Temp. | 193 | °C | |
| Cylinder Zone 3 Temp. | 199 | °C | |
| Cylinder Zone 4 Temp. | 204 | °C | |
| Cylinder Zone 5 Temp. | 210 | °C | |
| Adapter Temperature | 210 | °C | |
| Melt Temperature | 204 to 216 | °C | |
| Die Temperature | 210 | °C | |
| Extruder Screw Compression Ratio | 3.5:1.0 |
| Note Message | |
|---|---|
| 1 . | Thickness: 30 mil |
| 2 . | Thickness: 30 mil |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| POLYLAN T-10W | POLYMA Kunststoff GmbH & Co. KG | ABS | POLYLAN |
| Sanren N110 (Premium-grade) | SINOPEC Shanghai Petrochemical Co. Ltd. | LDPE | Sanren |
| 4DUR® 9K23100 | 4Plas | PBT | 4DUR® |
| AKROMID® A3 GK 30 1 natural (3673) | AKRO-PLASTIC GmbH | Nylon 66 | AKROMID® |
| Moplen HP500D | LyondellBasell Industries | PP Homopolymer | Moplen |
