Order Products : sales@su-jiao.com
POLYCOMPO PE SP3010
| Category: | LLDPE , Linear Low Density Polyethylene |
| Manufacturer: | POLYCOMPO Co.,Ltd. |
| Trademark: | POLYCOMPO PE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | FNROaY_POLYCOMPO-PE-SP3010.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| POLYCOMPO PE SP3010 is a Linear Low Density Polyethylene product. It can be processed by blown film and is available in Asia Pacific. Typical application: Bags/Liners. Primary characteristic: rigid. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.926 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) | 0.80 | g/10 min | ISO 1133 |
| Environmental Stress-Cracking Resistance (Compression Molded) | 1000 | hr | ASTM D1693 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D, Compression Molded) | 54 | ASTM D2240, ISO 868 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ISO 527-2 | ||
| Yield, Compression Molded | 13.0 | MPa | |
| Break, Compression Molded | 25.0 | MPa | |
| Tensile Strain (Break, Compression Molded) | 500 | % | ISO 527-2 |
| Flexural Modulus (Compression Molded) | 490 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength | No Break | ISO 179 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 106 | °C | ASTM D1525, ISO 306 |
| Peak Crystallization Temperature (DSC) | 124 | °C | ASTM D3418, ISO 3146 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Ravamid® BGF20 BK 45 | Ravago Group | Nylon 6 | Ravamid® |
| Sindustris PP HI5205 | Sincerity Australia Pty Ltd. | PP, Unspecified | Sindustris PP |
| DJSilicone NE-271 | DONGJUE SILICONE (NANJING) CO., LTD | Silicone | DJSilicone |
| Eltex® MED PH22D630 | INEOS Olefins & Polymers Europe | LDPE | Eltex® MED |
| Plaslube® HTN 01410 BK | Techmer Engineered Solutions | Nylon, Unspecified | Plaslube® |
