Order Products : sales@su-jiao.com
HiPrene® M570
| Category: | PP Impact Copolymer , Polypropylene Impact Copolymer |
| Manufacturer: | GS Caltex |
| Trademark: | HiPrene® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | FNMcel_HiPrene-M570.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| HiPrene® M570 is polypropylene impact copolymer with good processing stability and medium fluidity. It is intended especially for injection moulding of products where good impact resistance as well as high stiffness is required. This grade is available in different colors. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.910 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) | 40 | g/10 min | ASTM D1238 |
| Ash Content (600°C) | 1.0 | % | Internal method |
| Volatile Matter | 0.10 | % | Internal method |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale) | 95 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 23.0 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 50 | % | ASTM D638 |
| Flexural Modulus 1(23°C) | 1450 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 8.00 | kJ/m² | ASTM D256 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 80.0 | °C | |
| Drying Time | 2.0 | hr | |
| Hopper Temperature | 40.0 - 80.0 | °C | |
| Processing (Melt) Temp | 210 - 250 | °C | |
| Mold Temperature | 30.0 - 50.0 | °C | |
| Holding Pressure | 4.00 - 6.50 | MPa |
| Injection instructions |
|---|
| Back Pressure: Low to MediumScrew Speed: Low to MediumInjection Speed: 100 to 200 m/min |
| Note Message | |
|---|---|
| 1 . | 2.0 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TEREZ PA 6.6 7510 GF 30 FL HY /4 | TER HELL PLASTIC GMBH | Nylon 66 | TEREZ PA 6.6 |
| DJSilicone NE-250 | DONGJUE SILICONE (NANJING) CO., LTD | Silicone | DJSilicone |
| Geon™ Vinyl Flexible A4D02 | PolyOne Corporation | PVC, Flexible | Geon™ Vinyl Flexible |
| Kumho ABS 750 | Korea Kumho Petrochemical Co., Ltd. | ABS | Kumho ABS |
| MAJORIS EW850 | AD majoris | PP, Unspecified | MAJORIS |
