Order Products : sales@su-jiao.com
CERTENE™ PBM-8N
| Category: | PP Impact Copolymer , Polypropylene Impact Copolymer |
| Manufacturer: | Muehlstein |
| Trademark: | CERTENE™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | FL4G09_CERTENE-PBM-8N.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| PBM-8N is a certified prime grade High-Impact Nucleated copolymer specially formulated for improvement of injection molding crystallization rates. PBM-8N offers easy processability with fast mold filling, faster cycles, excellent low temperature Impact resistance, high stiffness and optimal balance of mechanical properties. PBM-8N typical applications include automotive parts, battery cases, appliance parts, heavy duty components, closures and housewares. PBM-8N complies with FDA regulation 21CRF 177.1520 (a)(3)(i) / (c)3.1+3.2, and most international regulations concerning the use of Polypropylene in contact with food. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.901 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 8.0 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale) | 83 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Yield, Injection Molded) | 26.2 | MPa | ASTM D638 |
| Tensile Elongation 2(Yield, Injection Molded) | 5.0 | % | ASTM D638 |
| Flexural Modulus - 1% Secant 3(Injection Molded) | 1310 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C, Injection Molded) | 240 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed, Injection Molded) | 110 | °C | ASTM D648 |
| Vicat Softening Temperature | 155 | °C | ASTM D1525 |
| Additional Information |
|---|
| All specimens were injection molded according to ASTM D2146 Type 1. |
| Note Message | |
|---|---|
| 1 . | 50 mm/min |
| 2 . | 50 mm/min |
| 3 . | 1.3 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Moplen EP348U | LyondellBasell Industries | PP Impact Copolymer | Moplen |
| Braskem PP F1000HC | Braskem America Inc. | PP, High Crystal | Braskem PP |
| KOPLA ABS KSG1010 | KOPLA Co., Ltd. | ABS | KOPLA ABS |
| P-FLEX H 200 | Putsch Kunststoffe GmbH | ABS | P-FLEX |
| Eltex® P KF359 | INEOS Olefins & Polymers Europe | PP Random Copolymer | Eltex® P |
