Order Products : sales@su-jiao.com
UNISOFT ADHESION™ AD-50A-NT-1-01
| Category: | SEBS , Styrene Ethylene Butylene Styrene Block Copolymer |
| Manufacturer: | UNITED SOFT PLASTICS, Inc. |
| Trademark: | UNISOFT ADHESION™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | FIH3H3_UNISOFT-ADHESION-AD-50A-NT-1-01.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
TPE Compound based on Styrene-Ethylene/Butylene-Styrene Block Copolymer Special bonding grade to PC/ABS, PC/PBT, PC, ABS, PBT, PET and PET-G; excellent processing; Unisoft Adhesion™ AD-50A-NT-1-01 is a general adhesion grade intended for use in injection molding and extrusion processes. All ingredients used for this compound are in compliance with certain FDA regulations. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.09 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow | 1.0 - 2.5 | % | ASTM D955 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 50 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 3.28 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 430 | % | ASTM D412 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 65.6 | °C | |
| Drying Time | 2.0 - 4.0 | hr | |
| Rear Temperature | 199 - 210 | °C | |
| Front Temperature | 218 - 229 | °C | |
| Nozzle Temperature | 235 - 246 | °C | |
| Mold Temperature | 40.6 - 65.6 | °C |
| Injection instructions |
|---|
| Temperatures are shown for PET-G adhesion. |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 201D UV | RTP Company | Nylon 612 | RTP |
| Wanthane® WHT-1180H | Wanhua Chemical Group Co., Ltd. | TPU-Polyester | Wanthane® |
| Aristech ALTAIR PLUS® (0.160 inch) | Aristech Acrylics LLC | ABS+Acrylic | Aristech |
| Edgetek™ AT-15GB/000 BK023 | PolyOne Corporation | Acetal (POM) Copolymer | Edgetek™ |
| Plaslube® PA6/10 BK | Techmer Engineered Solutions | Nylon 610 | Plaslube® |
