Order Products : sales@su-jiao.com
RELENE® C 31101
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | Reliance Industries Limited |
| Trademark: | RELENE® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | FHpepy_RELENE-C-31101.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Relene C 31101 is a black high density polyethylene compound for coating of metal pipes. It contains minimum 2% well dispersed, fine particle size carbon black in order to ensure excellent weathering resistance. Relene C 31101 offers excellent processability and adhesion characteristics. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.953 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 0.27 | g/10 min | ASTM D1238 |
| Environmental Stress-Cracking Resistance (Compression Molded, F50) | 400 | hr | ASTM D1693 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D, Compression Molded) | 65 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D638 | ||
| Yield, molding | 22.0 | MPa | ASTM D638 |
| Fracture, molding | 27.0 | MPa | ASTM D638 |
| Tensile Elongation (Break, Compression Molded) | 800 | % | ASTM D638 |
| Flexural Modulus (Compression Molded) | 730 | MPa | ASTM D790 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | -75.0 | °C | ASTM D746 |
| Vicat Softening Temperature | 122 | °C | ASTM D1525 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity | 1.0E+16 | ohms·cm | ASTM D257 |
| Dielectric Strength | 30 | kV/mm | ASTM D149 |
| Dielectric Constant | 2.40 | ASTM D150 | |
| Dissipation Factor | 5.0E-4 | ASTM D150 |
| Additional Information |
|---|
| Oxidation Induction Time, ASTM D3895: >65 min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Hybrid S555 | Ravago Manufacturing Americas, LLC | PC+ABS | Hybrid |
| OTECH PVC OE8836 - Profile | OTECH Corporation | PVC, Unspecified | OTECH PVC |
| Plaslube® PC GF20 TL10 BK | Techmer Engineered Solutions | PC | Plaslube® |
| TECACOMP® PEEK 450 ELS nano black 4134 | Ensinger GmbH | PEEK | TECACOMP® |
| Sylvin 9067F3 Red 6261 | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
