Order Products : sales@su-jiao.com
K-vinyl 105 Deg C Rating Insulation (Auto)
| Category: | PVC, Unspecified , Polyvinyl Chloride |
| Manufacturer: | Technovinyl Polymers India Ltd. |
| Trademark: | K-vinyl |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | FGGpwU_K-vinyl-105-Deg-C-Rating-Insulation-Auto-.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
K-vinyl 105 Deg C Rating Insulation (Auto) is a Polyvinyl Chloride material. It is available in Africa & Middle East for extrusion. Important attributes of K-vinyl 105 Deg C Rating Insulation (Auto) are:
Typical application of K-vinyl 105 Deg C Rating Insulation (Auto): Wire & Cable |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| RoHS Compliance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.30 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 89 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 16.8 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 300 | % | ASTM D638 |
| Aging | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Change in Tensile Strength in Air (120°C, 120 hr) | 12 | % | ASTM D573 |
| Change in Ultimate Elongation in Air (120°C, 120 hr) | 12 | % | ASTM D573 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | -27.0 | °C | ASTM D746 |
| Thermal Stability (200°C) | 2 | hr |
| Additional Information | Nominal Value | Unit | |
|---|---|---|---|
| Volatile Loss - 3 hrs (130°C) | < 0.50 | % |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity | 1.4E+14 | ohms·cm | ASTM D257 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sup-tech B801 | Shanghai Suptech Engineering Plastics Co. Ltd. | Nylon 6 | Sup-tech |
| DynaMix™ 3200-L | Polymer Dynamix | PEEK | DynaMix™ |
| GAPEX® HP RPP40EU97GY | Ferro Corporation | PP, Unspecified | GAPEX® HP |
| GERMAMID 6 XSZ | Kunststoff-Kontor-Hamburg GmbH | Nylon 6 | GERMAMID |
| K-vinyl 80 Deg C Rating Insulation (85-Wet) | Technovinyl Polymers India Ltd. | PVC, Unspecified | K-vinyl |
