Order Products : sales@su-jiao.com
Michilene F8200
| Category: | PP Copolymer , Polypropylene Copolymer |
| Manufacturer: | API Polymers, Inc. |
| Trademark: | Michilene |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | FGD4B9_Michilene-F8200.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Michilene F8200 is a polypropylene copolymer (PP Copoly) product,. It is available in North America. The main characteristics are: copolymer. |
| General Information | |
|---|---|
| Features |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.905 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 20 | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow | 1.4 | % | ASTM D955 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 24.8 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 12 | % | ASTM D638 |
| Flexural Modulus - Tangent | 1030 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | 120 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, not annealed | 87.8 | °C | ASTM D648 |
| 1.8 MPa, not annealed | 54.4 | °C | ASTM D648 |
| Additional Information |
|---|
| Drying Usually Not Necessary |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 82.2 | °C | |
| Drying Time | 3.0 | hr | |
| Suggested Max Moisture | 0.20 | % | |
| Rear Temperature | 216 | °C | |
| Middle Temperature | 216 | °C | |
| Front Temperature | 210 | °C | |
| Nozzle Temperature | 204 | °C | |
| Processing (Melt) Temp | 216 | °C | |
| Mold Temperature | 26.7 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Talcoprene® 1020TCD NAT | SO.F.TER. SPA | PP Homopolymer | Talcoprene® |
| Tarnamid® T-27 GF 50 | Grupa Azoty S.A. | Nylon 6 | Tarnamid® |
| AKROMID® A28 GF 15 1 natural (4382) | AKRO-PLASTIC GmbH | Nylon 66 | AKROMID® |
| ESENTTIA 20C65NA | Polipropileno del Caribe S.A. | PP Impact Copolymer | ESENTTIA |
| Jam PE 10Y02 | Jam Petrochemical Company | LLDPE | Jam PE |
