Order Products : sales@su-jiao.com

SILVER® SA-2311

Category:	SEBS , Styrene Ethylene Butylene Styrene Block Copolymer
Manufacturer:	Guangdong Silver Age Sci & Tech. Co., Ltd
Trademark:	SILVER®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	FDUULz_SILVER-SA-2311.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
SlLVER® SA—2000 elastomer is a kind of fully hydrogenated styryl block copolymers, which is of preventing violet and ozone, and is applied for toys and insole by injection molding and extrusion. SA—2000 Elastomer (full-hydrogenated styryl block copolymers) Characteristics: preventing violet and ozone Applications: soft toys, seal ring, frog shoe, frog glasses, mask, strap, antenna coat, bearing, insole, pipe and so on

Message

SlLVER® SA—2000 elastomer is a kind of fully hydrogenated styryl block copolymers, which is of preventing violet and ozone, and is applied for toys and insole by injection molding and extrusion.

SA—2000 Elastomer (full-hydrogenated styryl block copolymers)

Characteristics:

preventing violet and ozone

Applications:

soft toys, seal ring, frog shoe, frog glasses, mask, strap, antenna coat, bearing, insole, pipe and so on

General Information
Uses	Bearings Footwear Piping Seals Strapping Toys
Appearance	Natural Color
Processing Method	Extrusion Injection Molding

Physical	Nominal Value	Unit	Test Method
Specific Gravity	0.968	g/cm³	ASTM D792
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)	7.0	g/10 min	ASTM D1238

Hardness	Nominal Value	Unit	Test Method
Durometer Hardness (Shore A, 3 sec)	25		ASTM D2240

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength ¹	1.40	MPa	ASTM D638
Tensile Elongation ²(Break)	> 600	%	ASTM D638

Injection	Nominal Value	Unit
Processing (Melt) Temp	160 to 210	°C

Extrusion	Nominal Value	Unit
Melt Temperature	160 to 210	°C

Note Message
1 .	500 mm/min
2 .	500 mm/min

Resin Grade	Manufacturer	Category	Trademark
EnCom GF15 PPE-PS	EnCom, Inc.	PPE+PS	EnCom
Infino NH-1037	SAMSUNG SDI CO., LTD.	PC+ABS	Infino
INEOS PP 400-CA25	INEOS Olefins & Polymers Europe	PP Impact Copolymer	INEOS PP
Karina PINK PVC COMPOUND 650-39/56 (MP-1.0) (*)	Karina Ind. e Com. de Plásticos Ltda	PVC, Unspecified	Karina
Wanthane® WHT-1180EC	Wanhua Chemical Group Co., Ltd.	TPU-Polyester	Wanthane®