Order Products : sales@su-jiao.com
Hifax TYC 1152X BLACK
| Category: | TPO (POE) , Thermoplastic Polyolefin Elastomer |
| Manufacturer: | LyondellBasell Industries |
| Trademark: | Hifax |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | FBPuTC_HifaxTYC1152XBLACK.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Hifax TYC 1152X BLACK very high melt flow, 2,000 MPa flexural modulus, low density mineral- filled, paintable thermoplastic elastomeric olefin (TEO) resin. Enables part weight reduction and associated savings while maintaining all of the performance of traditional, higher density products. It has an excellent balance of properties and processability, and is typically used for automotive bumper fascias and exterior trim applications. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.01 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) | 30 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Yield) | 20.0 | MPa | ISO 527-2 |
| Flexural Modulus | 2000 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | ISO 180 | ||
| -40°C | 3.5 | kJ/m² | ISO 180 |
| 23°C | 35 | kJ/m² | ISO 180 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Maxelast® P3740 | Nantong Polymax Elastomer Technology, Co., Ltd | TPE | Maxelast® |
| Rulon® 123 | Saint Gobain Performance Plastics | PTFE | Rulon® |
| RALUPOL® UP 804 | RASCHIG GmbH | Polyester, TS | RALUPOL® |
| Fiberfil® PP-68/TC/20 | Fiberfil® Engineered Plastics Inc. | PP Copolymer | Fiberfil® |
| GELOY™ CR7520 resin | SABIC Innovative Plastics | ASA | GELOY™ |
