Order Products : sales@su-jiao.com
INEOS HDPE K44-15-186
| Category: | HDPE Copolymer , High Density Polyethylene Copolymer |
| Manufacturer: | INEOS Olefins & Polymers USA |
| Trademark: | INEOS HDPE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | FB5Gcu_INEOS-HDPE-K44-15-186.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| K44-15-186 is a blue high-density polyethylene copolymer designed specifically for extrusion of pipe by blending K44-15-122 natural resin with G38-70C BLU II concentrate or an approved equivalent. It has NSF Standard 14 certification and complies with ANSI/NSF Standard 61 health effects requirements and is recognized by the Plastic Pipe Institute as having a PE 3608 (formerly PE 3408) rating. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| RoHS Compliance |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.944 | g/cm³ | ASTM D4883 |
| Melt Mass-Flow Rate (MFR) (190°C/21.6 kg) | 13 | g/10 min | ASTM D1238 |
| Environmental Stress-Cracking Resistance | |||
| -- | > 2000 | hr | ASTM D1693B |
| -- | > 5000 | hr | ASTM D1693C |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 68 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1 | ASTM D638 | ||
| Yield | 22.8 | MPa | |
| Break | 31.0 | MPa | |
| Tensile Elongation 2(Break) | > 800 | % | ASTM D638 |
| Flexural Modulus - 2% Secant 3 | 827 | MPa | ASTM D790 |
| Hydrostatic Design Basis (23°C) | 11.0 | MPa | ASTM D2837 |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Cell Classification | 345464E | ASTM D3350 | |
| PENT - Notch Tensile | > 30 | hr | ASTM F1473 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | 320 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | -118 | °C | ASTM D746 |
| Vicat Softening Temperature | 126 | °C | ASTM D1525 |
| Note Message | |
|---|---|
| 1 . | 51 mm/min |
| 2 . | 51 mm/min |
| 3 . | Method I (3 point load) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Polytech & Net XP 9200 | Polytech & Net Gmbh | mLLDPE | Polytech & Net |
| Niblan V100 | Soredi S.p.a. | PBT | Niblan |
| ESTABLEND 4500 | Cossa Polimeri S.r.l. | PC+ABS | ESTABLEND |
| Hyundai EP Adhesives LE130A/1002 | HYUNDAI EP Co., Ltd. | PE, Unspecified | Hyundai EP Adhesives |
| Sylvin 9604-95 Clear Black 2103 | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
