Order Products : sales@su-jiao.com
Polybutene-1 PB 8640M
| Category: | PB , Polybutylene |
| Manufacturer: | LyondellBasell Industries |
| Trademark: | Polybutene-1 |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | F9kW6g_Polybutene-1-PB-8640M.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Polybutene-1 grade PB 8640M is a random copolymer of butene-1 with low ethylene content. In blends with PE polymers, it forms a separate, but well-dispersed phase. Its primary use is as a minority blend component in the seal layer of easy-opening packaging films, produced by blown film extrusion. A typical PE blend partner for PB 8640M could be any ethylene homo-or copolymer in the melt index range of 0.7 to 2.0 g/10min. Polybutene-1 is also highly compatible with polypropylene due to its similar molecular structure, and it can be used to modify PP sealing behavior or mechanical properties such as impact strength. PB-1 crystallizes slowly and is very shear sensitive in its flow behavior. Food law compliance information about this product can be found in separate product documentation. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.906 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) | ISO 1133 | ||
| 190°C/10.0 kg | 28 | g/10 min | ISO 1133 |
| 190°C/2.16 kg | 1.0 | g/10 min | ISO 1133 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Break) | 30.0 | MPa | ISO 527-2 |
| Tensile Strain (Break) | 300 | % | ISO 527-2 |
| Flexural Modulus | 250 | MPa | ISO 178 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Melting Temperature (DSC) | DSC | ||
| -- 1 | 97.0 | °C | DSC |
| -- 2 | 113 | °C | DSC |
| Additional Information |
|---|
| Tm2 corresponds with the melting point of crystalline form 2 which is measured immediately after solidification. Tm2 corresponds with the melting point available for each batch on the Certificate of Analysis (COA). |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Melt Temperature | 180 - 200 | °C |
| Extrusion instructions |
|---|
| Recommended processing temperatures: 180°C to 200°C. In cases were higher temperatures are required please contact your appropriate technical contact for support. |
| Note Message | |
|---|---|
| 1 . | Tm2 |
| 2 . | Tm1 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 300 MG 20 TFE 10 | RTP Company | PC | RTP |
| ShinkoLite-P MD | Mitsubishi Rayon America Inc. | Acrylic (PMMA) | ShinkoLite-P |
| Nipol® SBR NS522 | Zeon Corporation | SBR, Solution | Nipol® SBR |
| Compoceran E102B | Arakawa Chemical Industries, Ltd. | Epoxy | Compoceran |
| HiFill® PA6 0390 BK | Techmer Engineered Solutions | Nylon 6 | HiFill® |
