Order Products : sales@su-jiao.com
Kepital® TE-23(FU2015)
| Category: | Acetal (POM) Copolymer , Acetal (POM) Copolymer |
| Manufacturer: | KEP Americas |
| Trademark: | Kepital® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | F94VxF_Kepital-TE-23-FU2015-.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| High improvement in impact strength and flexibility. TE-23 is higher impact modified than TE-22, so is suitable for parts that high impact resistance is needed. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.36 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) | 8.0 | g/10 min | ISO 1133 |
| Molding Shrinkage - Flow (3.00 mm) | 1.8 | % | ISO 294-4 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Break, 23°C) | 45.0 | MPa | ISO 527-2 |
| Nominal Tensile Strain at Break (23°C) | > 50 | % | ISO 527-2 |
| Flexural Modulus (23°C) | 1650 | MPa | ISO 178 |
| Flexural Stress (23°C) | 60.0 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength | 13 | kJ/m² | ISO 179/1eA |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature (1.8 MPa, Unannealed) | 76.0 | °C | ISO 75-2/A |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity | 1.0E+16 | ohms | IEC 60093 |
| Volume Resistivity | 1.0E+14 | ohms·cm | IEC 60093 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating | HB | UL 94 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| PONYL 4006G30 | POLYROCKS CHEMICAL CO., LTD | Nylon 6 | PONYL |
| Sindustris PBT SG3251A | Sincerity Australia Pty Ltd. | PBT+PET | Sindustris PBT |
| TRIEL® 5280 | Samyang Corporation | TPEE | TRIEL® |
| EPLAMID 6 GFR UV 50 BK | EPSAN Plastik SAN. ve TiC. A.S. | Nylon 6 | EPLAMID 6 |
| Moplen EP400L | LyondellBasell Industries | PP Impact Copolymer | Moplen |
