Order Products : sales@su-jiao.com
ALCUDIA® HDPE 55250I
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | REPSOL |
| Trademark: | ALCUDIA® HDPE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | F8nvgE_ALCUDIA-HDPE-55250I.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
ALCUDIA® 55250I is a high density polyethylene grade of high fluidity intended for those injection moulding applications in which an excellent processability is required as well as good mechanical properties. TYPICAL APPLICATIONS
Recommended melt temperature range from 180 to 240°C. Processing conditions should be optimised for each production line. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.955 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 25 | g/10 min | ISO 1133 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore D) | 60 | ISO 868 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Yield) | 22.0 | MPa | ISO 527-2 |
| Flexural Modulus | 1000 | MPa | ISO 178 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 126 | °C | ISO 306/A |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 180 to 240 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| WELLAMID Nylon 6600 GV 35 HWCP | CP-Polymer-Technik GmbH & Co. KG | Nylon 66 | WELLAMID Nylon |
| Adell Polyamide BR-110 | Adell Plastics, Inc. | Nylon 6 | Adell Polyamide |
| ENFLEX EA3770A | ENPLAST Americas, a Ravago Group Company | TPE | ENFLEX |
| Epoxies, Ect. 20-1650 | Epoxies, Etc. | Silicone | Epoxies, Ect. |
| Jam HDPE HM CRP 100 Orange-Yellow | Jam Petrochemical Company | HDPE | Jam HDPE |
