Order Products : sales@su-jiao.com
ICORENE® 9050
| Category: | LMDPE , Linear Medium Density Polyethylene |
| Manufacturer: | ICO Polymers APAC, A Division of A. Schulman |
| Trademark: | ICORENE® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | F69yWs_ICORENE-9050.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
ICORENE™ 9050 is a linear medium density polyethylene resin that is suitable for the rotational moulding of large tanks and for applications where rigidity and toughness is required. ICORENE™ 9050 contains a fully formulated stabilisation package passing the minimum UV8 requirement of AS/NZS4766:2006. The ICORENE™ 9050 range of more commonly used Tank Colours is registered as complying with AS/NZS:4766 'Polyethylene Storage Tanks for Water & Chemicals'. This includes Australian food contact requirements (AS2070:1,8) and potable (drinking) water standard AS4020. Details of our registration for compliance with various standards can be obtained by contacting your account manager. ICORENE™ 9050 can be formulated in custom colours and as a UV20 Ultra UV version on request. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.938 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 3.2 | g/10 min | ASTM D1238 |
| Environmental Stress-Cracking Resistance (100% Igepal, F50) | > 500 | hr | ASTM D1693A |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 65 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus 1(3.20 mm, Compression Molded) | 625 | MPa | ASTM D638 |
| Tensile Strength 2(Yield, 3.20 mm, Compression Molded) | 18.0 | MPa | ASTM D638 |
| Tensile Elongation 3(Break, 3.20 mm, Injection Molded) | 950 | % | ASTM D638 |
| Flexural Modulus 4(3.20 mm, Compression Molded) | 775 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Impact Strength 5(-40°C, 3.20 mm) | 65.0 | J | ARM |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| UV Rating 6 | > 8000 | hr | ASTM 2565 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 120 | °C | ASTM D1525 |
| Note Message | |
|---|---|
| 1 . | 0.50 mm/min |
| 2 . | 50 mm/min |
| 3 . | 50 mm/min |
| 4 . | 1.3 mm/min |
| 5 . | Impact strength varies with part thickness and moulding conditions. Prototype testing is highly recommended |
| 6 . | 50% Retained Tensile Elongation |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Salflex 260EI | Salflex Polymers Ltd. | TPO (POE) | Salflex |
| DIC.PPS FZ-1150 | DIC Corporation | PPS | DIC.PPS |
| Hostacom DKC745D | LyondellBasell Industries | TPO (POE) | Hostacom |
| ISOPAK® 640 | Great Eastern Resins Industrial Co Ltd (GRECO) | PC+ABS | ISOPAK® |
| Sylvin 7868-75 Natural | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
