Order Products : sales@su-jiao.com

PPO™ 630 resin

Category:	PPE+PS , Polyphenylene Ether + PS
Manufacturer:	SABIC Innovative Plastics
Trademark:	PPO™
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	F3o9Va_PPO630resin.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
PPO* 630 resin is a medium molecular weight polymer based on Polyphenylene Ether (PPE). PPO* is intended for use as an additive or a building block in a variety of thermoplastics and thermoplastic elastomers like Styrenic Block Copolymers. PPO* resin can be used to improve properties like Heat Distortion and Creep Resistance. It is hydrolytically stable and non-hydroscopic (typically less than 0.2% water uptake). The polymer is soluble in common organic solvents like toluene, chloroform, and THF. Chemical name: Poly (2,6-dimethyl-, 1,4-phenylene ether) (PPE) Formula: (C8H8O)n Regulatory Status: Complies with the FDA regulation 21CFR 177..2460. Also complies with EU Directive 2002/72/EC.

Message

PPO* 630 resin is a medium molecular weight polymer based on Polyphenylene Ether (PPE). PPO* is intended for use as an additive or a building block in a variety of thermoplastics and thermoplastic elastomers like Styrenic Block Copolymers. PPO* resin can be used to improve properties like Heat Distortion and Creep Resistance. It is hydrolytically stable and non-hydroscopic (typically less than 0.2% water uptake). The polymer is soluble in common organic solvents like toluene, chloroform, and THF. Chemical name: Poly (2,6-dimethyl-, 1,4-phenylene ether) (PPE) Formula: (C8H8O)n Regulatory Status: Complies with the FDA regulation 21CFR 177..2460. Also complies with EU Directive 2002/72/EC.

General Information
Features	Hydrolysis stability Medium molecular weight
Uses	Additive
Agency Ratings	FDA 21 CFR 177.2460 European 2002/72/EC
Forms	Powder

Physical	Nominal Value	Unit	Test Method
Density ¹	0.462	g/cm³	ISO 1183
D	2.80		Internal method
Mean Particle Size	190.0	µm	Internal method
Mn	17300		Internal method
Mw	47600		Internal method
Phenolic End-group Content	1180	ppm	Internal method
Tg (half width)	214	°C	Internal method
Intrinsic Viscosity	0.33	dl/g	Internal method

Additional Information	Nominal Value	Unit	Test Method
Toluene Content		ppm	Internal method

Note Message
1 .	Bulk Density

Resin Grade	Manufacturer	Category	Trademark
Shin-Etsu Elastomer KE-2090-20A/B	Shin-Etsu Silicones of America	Silicone Rubber, HTV	Shin-Etsu Elastomer
Adell Polyamide BR-17	Adell Plastics, Inc.	Nylon 6	Adell Polyamide
Crastin® HR5315HF NC010	DuPont Performance Polymers	PBT	Crastin®
Karina RED COLOR CONCENTRATE -E 42/250-FC-LMP	Karina Ind. e Com. de Plásticos Ltda	PVC, Unspecified	Karina
LEXAN™ LUX7430C resin	SABIC Innovative Plastics	PC	LEXAN™