Order Products : sales@su-jiao.com
Westlake LDPE EM808AA
| Category: | LDPE , Low Density Polyethylene |
| Manufacturer: | Westlake Chemical Corporation |
| Trademark: | Westlake LDPE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | F1sD2g_Westlake-LDPE-EM808AA.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
WESTLAKE low-density polyethylene EM808 is a general-purpose low-density formulation used for injection molding applications and general purpose extrusion. EM808AA = 808A or 808E |
| General Information | |
|---|---|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.917 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 7.0 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Break) | 10.0 | MPa | ASTM D638 |
| Tensile Elongation 2(Break) | 400 | % | ASTM D638 |
| Flexural Modulus | 200 | MPa | ASTM D790 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 149 to 166 | °C |
| Note Message | |
|---|---|
| 1 . | Type IV, 500 mm/min |
| 2 . | Type IV, 500 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| PREMIER™ A230-HTHF | Chomerics, div. of Parker Hannifin Corp. | PC+ABS | PREMIER™ |
| Tenite™ Butyrate 485E3720016 Clear, Trsp | Eastman Chemical Company | CAB | Tenite™ Butyrate |
| HiFill® PA6/6,6 GF30 IM2 HS L | Techmer Engineered Solutions | Nylon 66 | HiFill® |
| PENTAMID B SK H schwarz | PENTAC Polymer GmbH | Nylon 6 | PENTAMID B |
| TOTAL Polystyrene EPS XLR 5359SE | TOTAL Refining & Chemicals | PS (EPS) | TOTAL Polystyrene |
