Order Products : sales@su-jiao.com
Braskem PE GE7252XP
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | Braskem |
| Trademark: | Braskem PE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | ExOkmd_BraskemPEGE7252XP.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
GE7252XP is a bimodal high density polyethylene specially developed to manufacturing of caps and closures to beverages and soft drinks with low CO2 content. This grade offers a good balance between chemical and mechanical resistance, good processability and organoleptic properties. Applications: Caps and closures for low or non CO2 content Additives: Slip. Process: Injection molding. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.950 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 2.1 | g/10 min | ASTM D1238 |
| Environmental Stress-Cracking Resistance (50°C, 2.00 mm, 10% Igepal, Compression Molded, F50) | 15.0 | hr | ASTM D1693 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D638 | ||
| Yield, molding | 26.0 | MPa | ASTM D638 |
| Fracture, molding | 32.0 | MPa | ASTM D638 |
| Tensile Elongation | ASTM D638 | ||
| Yield, molding | 9.0 | % | ASTM D638 |
| Fracture, molding | 400 | % | ASTM D638 |
| Flexural Modulus - 1% Secant (Compression Molded) | 1100 | MPa | ASTM D790 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sinvicomp SRG7565 | Teknor Apex Asia Pacific PTE. LTD. | PVC, Flexible | Sinvicomp |
| NILAMID® A3 HH K40 | Nilit Plastics | Nylon 66 | NILAMID® |
| APEX® 80328 | Teknor Apex Company | PVC, Flexible | APEX® |
| Elastron® G G101.D47.B | Elastron USA, Inc. | SEBS | Elastron® G |
| OP - PC - Unfilled 1518-FDA | Oxford Polymers | PC | OP - PC - Unfilled |
