Order Products : sales@su-jiao.com
Andur 800 DP
| Category: | PUR-Est/eth,TDI , Polyurethane (Polyester/Polyether mix, TDI) |
| Manufacturer: | Anderson Development Company |
| Trademark: | Andur |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | EwhuQb_Andur-800-DP.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Andur 800-DP is the result of several years of research to develop a high performance, moderate cost prepolymer for the cast urethane industry. This new product is a poly-ester/ether, toluene diisocyanate-terminated prepolymer. An elastomer with a hardness of 80 Shore D is obtained by reaction with Curene 442. Elastomers of lower hardness can be obtained by reaction with various polyols and their combination with Curene 442 and other diamines, or by the use of plasticizers. |
| General Information | |
|---|---|
| Features |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.23 | g/cm³ | ASTM D792 |
| Thermoset | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Thermoset Mix Viscosity | ASTM D2393 | ||
| 70°C | 3700 | cP | ASTM D2393 |
| 100°C | 770 | cP | ASTM D2393 |
| Additional Information |
|---|
| NCO: 7.4 to 7.8%Specific Gravity, ASTM D792, 77°F: 1.23 g/mlSpecific Gravity, ASTM D792, 212°F: 1.12 g/ml |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| MARCOBLEND AU R3 | POLY GIN | PC | MARCOBLEND |
| Sarlink® TPE ML-1150DN | Teknor Apex Company | TPE | Sarlink® TPE |
| THERMOLAST® K TC6LEZ (Series: UV/FG) | KRAIBURG TPE | TPE | THERMOLAST® K |
| TEREZ PA 6 7510 GF 15 GK 15 | TER HELL PLASTIC GMBH | Nylon 6 | TEREZ PA 6 |
| GAPEX® RPP20EU04NA | Ferro Corporation | PP, Unspecified | GAPEX® |
