Order Products : sales@su-jiao.com
UNISOFT ADHESION™ AD-30A-CL-8-01
| Category: | SEBS , Styrene Ethylene Butylene Styrene Block Copolymer |
| Manufacturer: | UNITED SOFT PLASTICS, Inc. |
| Trademark: | UNISOFT ADHESION™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | ErzOxg_UNISOFT-ADHESION-AD-30A-CL-8-01.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
TPE Compound based on Styrene-Ethylene/Butylene-Styrene Block Copolymer Clear bonding grade to Copolyester (PETG), PC, PS and Nory®, HIPS and PC/ABS; excellent tear strength properties; Unisoft Adhesion™ AD-30A-CL-8-01 is a general adhesion grade intended for use in injection molding and extrusion processes. All ingredients used for this compound are in compliance with certain FDA regulations. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.910 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow | 0.50 to 3.0 | % | ASTM D955 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 30 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 7.58 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 700 | % | ASTM D412 |
| Tear Strength | 29.1 | kN/m | ASTM D624 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 179 to 193 | °C | |
| Front Temperature | 199 to 218 | °C | |
| Nozzle Temperature | 224 to 246 | °C | |
| Mold Temperature | 29.4 to 65.6 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SCANTEC PC S75R GF10 | Polykemi AB | PC | SCANTEC |
| SLOVAMID® 66/6 CF 30 | Plastcom | Nylon 66/6 | SLOVAMID® 66/6 |
| Hytrel® HTR8341G BK320 | DuPont Performance Polymers | TPC-ET | Hytrel® |
| OP - PC - Unfilled 20-FDA | Oxford Polymers | PC | OP - PC - Unfilled |
| ULTEM™ EXUM0169 resin | SABIC Innovative Plastics | PEI | ULTEM™ |
