Order Products : sales@su-jiao.com
Generic PE Copolymer
| Category: | PE Copolymer , Polyethylene Copolymer |
| Manufacturer: | Generic |
| Trademark: | Generic |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | EoBEm4_Generic-PE-Copolymer.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
This data represents typical values that have been calculated from all products classified as: Generic PE Copolymer This information is provided for comparative purposes only. |
| General Information |
|---|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | |||
| -- | 0.867 to 0.963 | g/cm³ | ASTM D792 |
| 23°C | 0.939 to 0.974 | g/cm³ | ISO 1183 |
| -- | 0.922 to 1.30 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) | |||
| 190°C/2.16 kg | 0.97 to 25 | g/10 min | ASTM D1238 |
| 190°C/2.16 kg | 0.070 to 6.1 | g/10 min | ISO 1133 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness | |||
| 23°C | 30 to 93 | ASTM D2240 | |
| 23°C | 55 to 62 | ISO 868 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | |||
| Yield, 23°C | 9.86 to 29.3 | MPa | ASTM D638 |
| Yield, 23°C | 19.8 to 26.0 | MPa | ISO 527-2 |
| Break, 23°C | 6.43 to 37.0 | MPa | ISO 527-2 |
| Tensile Strain | |||
| Yield, 23°C | 7.0 to 11 | % | ISO 527-2 |
| Break, 23°C | 200 to 1000 | % | ASTM D638 |
| Break, 23°C | 510 to 970 | % | ISO 527-2 |
| Flexural Modulus | |||
| 23°C | 86.5 to 1300 | MPa | ASTM D790 |
| 23°C | 18.0 to 1160 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength (23°C) | 3.3 to 15 | kJ/m² | ISO 179 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | |||
| -- | 113 to 129 | °C | ASTM D1525 |
| -- | 123 to 125 | °C | ISO 306 |
| Melting Temperature (DSC) | 85.4 to 108 | °C | ISO 3146 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SABIC® STAMAX 30YM240 resin | SABIC Innovative Plastics | PP, Unspecified | SABIC® STAMAX |
| Viprene™ G65A-32U-NAT | Alliance Polymers & Services | TPV | Viprene™ |
| Kumho ABS HU650ZW | Korea Kumho Petrochemical Co., Ltd. | ABS | Kumho ABS |
| Infino VB-5400G | SAMSUNG SDI CO., LTD. | PBT | Infino |
| LUVOCOM® 3-8714/BL | Lehmann & Voss & Co. | Nylon 6 | LUVOCOM® |
