Monprene® OM-10185 Datasheet,TPE,Teknor Apex Company-SHANGHAI SUSHENG

Message
Monprene®OM-10185 is a thermoplastic elastomer (TPE) material,. This product is available in North America, Africa and the Middle East, Latin America, Europe or Asia Pacific. The processing method is extrusion or injection molding. Monprene®The main features of the OM-10185 are: ROHS certification Good processability Strong adhesion high hardness Wear-resistant Typical application areas include: Handle engineering/industrial accessories Electrical/electronic applications electrical appliances Tools

General Information
Features	Low Specific Gravity Low density smoothness Light stabilization Workability, good Adhesiveness Good formability Good processing stability Good liquidity Good color stability Good coloring Good wear resistance Medium liquidity Good demoulding performance High hardness
Uses	Handle overmolding Electrical appliances Power/other tools Soft handle Mobile phone Sporting goods Stationery Knob Dental application field Toothbrush handle Bonding
RoHS Compliance	RoHS compliance
Appearance	Opacity Available colors Natural color
Forms	Particle
Processing Method	Extrusion Injection molding

Physical	Nominal Value	Unit	Test Method
Specific Gravity	0.938	g/cm³	ASTM D792
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)	7.0	g/10 min	ASTM D1238

Hardness	Nominal Value	Test Method
Durometer Hardness		ASTM D2240
Shore A, 1 second, injection molding	87	ASTM D2240
Shore A, 5 seconds, injection molding	85	ASTM D2240

Elastomers	Nominal Value	Unit	Test Method
Tensile Stress ¹			ASTM D412
Transverse flow : 100% strain	5.28	MPa	ASTM D412
Flow : 100% strain	8.31	MPa	ASTM D412
Transverse flow : 300% strain	6.79	MPa	ASTM D412
Tensile Strength ²			ASTM D412
Transverse flow : Fracture	10.2	MPa	ASTM D412
Flow : Fracture	10.2	MPa	ASTM D412
Tensile Elongation ³			ASTM D412
Transverse flow : Fracture	560	%	ASTM D412
Flow : Fracture	230	%	ASTM D412
Tear Strength ⁴			ASTM D624
Transverse flow	63.4	kN/m	ASTM D624
Flow	54.6	kN/m	ASTM D624
Compression Set ⁵			ASTM D395B
23°C, 22 hr	22	%	ASTM D395B
70°C, 22 hr	94	%	ASTM D395B

Additional Information	Nominal Value
Adhesion to Nylon

Legal statement
The information and recommendations contained in this bulletin are, to the best of our knowledge, accurate and reliable but no guarantee of their accuracy is made. All products are sold upon condition that purchasers shall make their own tests to determine the suitability of such products for their particular purposes and uses and purchaser assumes all risks and liability for the results of use of the products, including use in accordance with seller's recommendations. Nothing in this bulletin constitutes permission or a recommendation to practice or use any invention covered by any patent owned by this company or others. There is no warranty of merchantability and there are no other warranties for the products described. For detailed Product Stewardship information, please contact us. Any product of Teknor Apex, including product names, shall not be used or tested in medical or food contact applications without the prior written acknowledgement of Teknor Apex as to the intended use. Please note that some products may not be available in one or more countries.

Legal statement

The information and recommendations contained in this bulletin are, to the best of our knowledge, accurate and reliable but no guarantee of their accuracy is made. All products are sold upon condition that purchasers shall make their own tests to determine the suitability of such products for their particular purposes and uses and purchaser assumes all risks and liability for the results of use of the products, including use in accordance with seller's recommendations. Nothing in this bulletin constitutes permission or a recommendation to practice or use any invention covered by any patent owned by this company or others. There is no warranty of merchantability and there are no other warranties for the products described. For detailed Product Stewardship information, please contact us. Any product of Teknor Apex, including product names, shall not be used or tested in medical or food contact applications without the prior written acknowledgement of Teknor Apex as to the intended use. Please note that some products may not be available in one or more countries.

Injection	Nominal Value	Unit
Drying Temperature	60	°C
Drying Time	2.0 - 4.0	hr
Rear Temperature	204 - 238	°C
Middle Temperature	204 - 238	°C
Front Temperature	204 - 238	°C
Nozzle Temperature	204 - 238	°C
Processing (Melt) Temp	204 - 238	°C
Mold Temperature	16 - 32	°C
Injection Pressure	1.38 - 5.52	MPa
Back Pressure	0.172 - 0.862	MPa
Screw Speed	50 - 100	rpm
Cushion	3.81 - 25.4	mm

Injection instructions
Moisture can degrade the material. Drying is suggested. This can be accomplished by placing the material in a desiccant dryer for 2 to 4 hours at 140°F.

Extrusion	Nominal Value	Unit
Cylinder Zone 1 Temp.	193 - 238	°C
Cylinder Zone 2 Temp.	193 - 238	°C
Cylinder Zone 3 Temp.	193 - 238	°C
Cylinder Zone 4 Temp.	193 - 238	°C
Cylinder Zone 5 Temp.	193 - 238	°C
Die Temperature	193 - 238	°C

Note Message
1 .	C mold, 510mm/min
2 .	C mold, 510mm/min
3 .	C mold, 510mm/min
4 .	C mold, 510mm/min
5 .	Type 1

Category:	TPE , Thermoplastic Elastomer
Manufacturer:	Teknor Apex Company
Trademark:	Monprene®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	EnUa0x_MonpreneOM10185.pdf
PRICE:	Order Products email sales@su-jiao.com

Resin Grade	Manufacturer	Category	Trademark
PPR PPHO03	Premier Plastic Resins, Inc.	PP Homopolymer	PPR
PRL NY66-GP1	Polymer Resources Ltd.	Nylon 66	PRL
Baoding 68T90	Baoding Bangtai Polymeric New-Materials Co.,Ltd	TPU-Polyester	Baoding
Hyundai EP TOP COAT PT900W / 2101	HYUNDAI EP Co., Ltd.	PP, Unspecified	Hyundai EP TOP COAT
Monprene® MP-1500	Teknor Apex Company	TPE	Monprene®