Order Products : sales@su-jiao.com
Mecoline I RDX 5244 F
| Category: | Fluorelastomer , Fluoroelastomer |
| Manufacturer: | Melos GmbH |
| Trademark: | Mecoline |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | Em5xKa_Mecoline-I-RDX-5244-F.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| This modified fluoro-elastomer based compound is the right choice for manufacturing very flexible wires and cables. Applications in harsh environments in military, aerospace, automotive and other industries, where high performance takes first place. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| RoHS Compliance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.90 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (230°C/21.6 kg) | 12 | g/10 min | ISO 1133 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore A) | 74 | ISO 7619 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | IEC 811-1-1 | ||
| -- 1 | 12.0 | MPa | |
| -- 2 | 3.00 | MPa | |
| Tensile Strain | |||
| Break 3 | 200 | % | IEC 811-1-4 |
| Break 4 | > 200 | % | IEC 811-1-1 |
| Break 5 | 450 | % | IEC 811-1-1 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity | > 1.0E+14 | ohms·cm | ASTM D257 |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Resistance to Flame Propagation - after burn | < 2.0 | sec | ISO 6722 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Head Temperature | 215 to 225 | °C | |
| Cylinder Zone 1 Temp. | 180 to 190 | °C | |
| Cylinder Zone 2 Temp. | 200 to 210 | °C | |
| Cylinder Zone 3 Temp. | 210 to 220 | °C | |
| Cylinder Zone 4 Temp. | 215 to 225 | °C | |
| Cylinder Zone 5 Temp. | 215 to 225 | °C | |
| Adapter Temperature | 215 to 225 | °C | |
| Die Temperature | 215 to 225 | °C |
| Note Message | |
|---|---|
| 1 . | After crosslinking |
| 2 . | Before crosslinking |
| 3 . | After ageing in air oven 168h at 250°C |
| 4 . | After crosslinking |
| 5 . | Before crosslinking |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TROGAMID® CX CX9701 | Evonik Industries AG | Nylon, Unspecified | TROGAMID® CX |
| Nipol® NBR N21L | Zeon Corporation | NBR | Nipol® NBR |
| INEOS PP H12Z-03 | INEOS Olefins & Polymers USA | PP Homopolymer | INEOS PP |
| LNP™ COLORCOMP™ I1000 compound | SABIC Innovative Plastics | Nylon 612 | LNP™ COLORCOMP™ |
| Paxon™ 7000 Series | ExxonMobil Chemical | HDPE, UHMW | Paxon™ |
