Order Products : sales@su-jiao.com
Halene H HD T10
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | Haldia Petrochemicals Ltd. |
| Trademark: | Halene H |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | Em0EGC_Halene-H-HD-T10.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
HD T10 is a HDPE yarn/monofilament grade produced by Spherilene Technology. This grade can be used in yarns/monofilament for Fabrics, Nets, Twines & Ropes. HD T10 is characterized by excellent processability and mechanical strength. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density 1 | 0.950 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 1.1 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 61 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 2 | ASTM D638 | ||
| Yield, molding | 21.0 | MPa | ASTM D638 |
| Fracture, molding | 38.0 | MPa | ASTM D638 |
| Tensile Elongation 3(Break, Compression Molded) | > 1000 | % | ASTM D638 |
| Flexural Modulus | 1000 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 400 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Peak Melting Temperature | 131 | °C | ASTM D3418 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 200 - 240 | °C | |
| Cylinder Zone 2 Temp. | 200 - 240 | °C | |
| Cylinder Zone 3 Temp. | 200 - 240 | °C | |
| Cylinder Zone 4 Temp. | 200 - 240 | °C | |
| Cylinder Zone 5 Temp. | 200 - 240 | °C | |
| Die Temperature | 230 - 250 | °C |
| Extrusion instructions |
|---|
| Quench Temperature: 30°CStretching Temperature: 95 to 120°C |
| Note Message | |
|---|---|
| 1 . | 23°C |
| 2 . | Type 4 |
| 3 . | Type 4 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TABOND 5006 | SILON s.ro | PP, Unspecified | TABOND |
| Bayflex® 180 RRIM | Covestro - PUR | PUR-Ether/MDI | Bayflex® |
| Evoprene™ GC 5617 | AlphaGary | SEBS | Evoprene™ GC |
| Diamond GPPS GP-550P | Diamond Polystyrene | PS (GPPS) | Diamond GPPS |
| Flontech® FT-GL15-M3-6 | Guarniflon S.p.A. - Flontech Division | PTFE | Flontech® |
