Order Products : sales@su-jiao.com
Sumitomo DAP 73-70-70 V0-P
| Category: | DAP , Diallyl Phthalate |
| Manufacturer: | Sumitomo Bakelite North America, Inc. |
| Trademark: | Sumitomo DAP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | Ehvq7V_Sumitomo-DAP-73-70-70-V0-P.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| 73-70-70 V0-P is a short glass fiber reinforced, flame retardant, diallyl ortho-phthalate molding compounds, which meet the requirements of ASTM D5948 Type SDG-F. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Additive |
|
| Features |
|
| Agency Ratings |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.91 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow | 0.20 to 0.40 | % | ASTM D955 |
| Water Absorption - 48 hr (50°C) | 0.25 | % | ASTM D570 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flammability - Ignition | 1.9 | min | ASTM D229 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | 76.0 | MPa | ASTM D638 |
| Flexural Modulus | 11700 | MPa | ASTM D790 |
| Flexural Strength | 124 | MPa | ASTM D790 |
| Compressive Strength | 150 | MPa | ASTM D695 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | 32 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | > 260 | °C | ASTM D648 |
| CLTE - Flow | 2.1E-5 | cm/cm/°C | ASTM E831 |
| Thermal Conductivity | 0.29 | W/m/K | ASTM C518 |
| RTI Elec | 130 | °C | UL 746 |
| RTI Imp | 130 | °C | UL 746 |
| RTI Str | 130 | °C | UL 746 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Dielectric Strength 1 | 14 | kV/mm | ASTM D149 |
| Dielectric Constant 2 | ASTM D150 | ||
| 1 kHz | 4.20 | ||
| 1 MHz | 3.50 | ||
| Dissipation Factor 3 | ASTM D150 | ||
| 1 kHz | 0.010 | ||
| 1 MHz | 0.014 | ||
| Arc Resistance | 130 | sec | ASTM D495 |
| Comparative Tracking Index | > 600 | V | ASTM D3638 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating | UL 94 | ||
| 1.60 mm | V-0 | ||
| 3.20 mm | V-0 | ||
| Oxygen Index | 45 | % | ASTM D2863 |
| Note Message | |
|---|---|
| 1 . | 60 Hz, Wet |
| 2 . | Wet |
| 3 . | Wet |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Marlex® HXB TR-512 | Chevron Phillips Chemical Company LLC | HDPE, HMW | Marlex® |
| TEREZ PA 6 7500 GF 30 AM | TER HELL PLASTIC GMBH | Nylon 6 | TEREZ PA 6 |
| DJSilicone NE-- T-1/NE-T-1U | DONGJUE SILICONE (NANJING) CO., LTD | Silicone | DJSilicone |
| Hapflex™ 580 | Hapco Inc. | TP, Unspecified | Hapflex™ |
| Rotuba CAP CP800 (10% Plasticizer) | Rotuba Extruders, Inc. | CAP | Rotuba CAP |
