Order Products : sales@su-jiao.com
RABALON® PJ8300C
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | Mitsubishi Chemical Performance Polymers, Inc. |
| Trademark: | RABALON® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | Eh4o22_RABALON-PJ8300C.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
RABALON® PJ8300C is a Thermoplastic Elastomer (TPE) material. It is available in Asia Pacific, Europe, or North America. Primary attribute of RABALON® PJ8300C: Sterilizable. Typical application of RABALON® PJ8300C: Medical/Healthcare |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Appearance |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.890 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 16 | g/10 min | ISO 1133 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore A) | 78 | ISO 7619 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (100% Strain) | 3.10 | MPa | ISO 37 |
| Tensile Stress (Break) | 16.0 | MPa | ISO 37 |
| Tensile Elongation (Break) | 850 | % | ISO 37 |
| Tear Strength | 39 | kN/m | ISO 34-1 |
| Compression Set 1(70°C, 22 hr) | 50 | % | ISO 815 |
| Note Message | |
|---|---|
| 1 . | 6 sheets (each thickness = 2mm) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TRANSMARE® 19HT20-0.001 | Transmare Compounding B.V. | PP Homopolymer | TRANSMARE® |
| Badamid® PA612 CF30 | Bada AG | Nylon 612 | Badamid® |
| CompaMid® PA 6.6 GF 30 HI | DimeLika Plast GmbH | Nylon 66 | CompaMid® |
| Goodfellow PHB Biopolymer (PHB) | Goodfellow Corporation | Biodeg Polymers | Goodfellow PHB |
| EMERGE™ PC 4330-6 | Trinseo | PC | EMERGE™ |
