Order Products : sales@su-jiao.com

Ultramid® B3UGM210

Category:	Nylon 6 , Polyamide 6
Manufacturer:	BASF Corporation
Trademark:	Ultramid®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	Eg47u8_Ultramid-B3UGM210.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message
Halogen- and phosphorus-free injection molding grade with very high rigidity, low smoke density and outstanding electrical properties.

General Information
Filler / Reinforcement	Glass fiber reinforced material, 10% filler by weight Mineral filler, 50% filler by weight
Additive	Flame retardancy
Features	Low Halogen Content Rigidity, high Good electrical performance Phosphorus content, low (to none) Oil resistance Flame retardancy
Agency Ratings	EC 1907/2006 (REACH)
RoHS Compliance	RoHS compliance
Forms	Particle
Processing Method	Injection molding
Resin ID (ISO 1043)	PA6-GF10 M50 Fr

Physical	Dry	Conditioned	Unit	Test Method
Density	1.67	--	g/cm³	ISO 1183
Apparent Density	0.75	--	g/cm³
Melt Volume-Flow Rate (MVR) (275°C/5.0 kg)	25.0	--	cm³/10min	ISO 1133
Water Absorption (Equilibrium, 23°C, 50% RH)	1.0 - 1.4	--	%	ISO 62
Mold shrinkage- Test box (1.50 mm)	0.50	--	%

Flammability	Dry	Conditioned	Unit	Test Method
Conventional Index of Toxicity - 25 kW/m²	0.400	--		ISO 5659-2
Fire Performance - UL94+HAI+HWI ¹	> 750.0	--	µm	UL 746C
French Railway Standard - fire and smoke classification	I3 / F2	--		NF F16-101
Smoke density- DS (max, 20 min), 25 kW/m²	10	--		ISO 5659-2

Additional Information	Dry	Conditioned		Test Method
Hot Wire Test (> 750.0 µm)	2.00	--		ASTM D3874

Injection	Dry	Unit
Screw Speed		mm/sec

Mechanical	Dry	Conditioned	Unit	Test Method
Tensile Modulus	11000	6500	MPa	ISO 527-2
Tensile Stress (Yield)	110	80.0	MPa	ISO 527-2
Tensile Strain (Break)	1.8	2.5	%	ISO 527-2

Impact	Dry	Conditioned	Unit	Test Method
Charpy Unnotched Impact Strength	30	30	kJ/m²	ISO 179/1eU

Thermal	Dry	Conditioned	Unit	Test Method
Heat Deflection Temperature
0.45 MPa, not annealed	215	--	°C	ISO 75-2/B
1.8 MPa, not annealed	195	--	°C	ISO 75-2/A
Melting Temperature (DSC)	220	--	°C	ISO 3146
RTI Elec (1.50 mm)	130	--	°C	UL 746

Electrical	Dry	Conditioned	Unit	Test Method
Surface Resistivity	--	1.0E+13	ohms	IEC 60093
Volume Resistivity	1.0E+15	1.0E+12	ohms·cm	IEC 60093
Dielectric Constant (1 MHz)	4.50	5.00		IEC 60250
Dissipation Factor (1 MHz)	0.015	0.050		IEC 60250
Comparative Tracking Index (Solution A)	600	--	V	IEC 60112

Flammability	Dry	Conditioned	Unit	Test Method
Flame Rating				UL 94
0.750 mm	V-2	--		UL 94
> 1.50 mm	V-0	--		UL 94
Glow Wire Flammability Index (1.00 mm)	960	--	°C	IEC 60695-2-12
Oxygen Index	> 45	--	%	ISO 4589-2

Injection	Dry	Unit
Drying Temperature	80.0	°C
Drying Time	4.0	hr
Suggested Max Moisture	0.15	%
Hopper Temperature	80.0	°C
Rear Temperature	280	°C
Middle Temperature	290	°C
Front Temperature	300	°C
Nozzle Temperature	300	°C
Processing (Melt) Temp	290 - 310	°C
Mold Temperature	80.0 - 90.0	°C

Injection instructions
Residence time : <10 min

Note Message
1 .	For Electrical Insulation/Barrier with close proximity (< 0,8 mm) to uninsulated live parts according to UL 746C

Resin Grade	Manufacturer	Category	Trademark
Suprel® SVA 9301	Axiall Corporation	PVC, Rigid	Suprel® SVA
Axiall PVC 12881	Axiall Corporation	PVC, Flexible	Axiall PVC
Axiall PVC 8266 Natural	Axiall Corporation	PVC, Rigid	Axiall PVC
Hostalen ACP 7740 F1	LyondellBasell Industries	HDPE	Hostalen
Polyfast SA003	Ravago Group	ASA	Polyfast