Order Products : sales@su-jiao.com
CoolPoly® E8103
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | Celanese Corporation |
| Trademark: | CoolPoly® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | EfHgDu_CoolPoly-E8103.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| CoolPoly E series of thermally conductive plastics transfers heat, a characteristic previously unavailable in injection molding grade polymers. CoolPoly is lightweight, netshape moldable and allows design freedom in applications previously restricted to metals. The E series is electrically conductive and provides inherent EMI/RFI shielding charactersitics. |
| General Information | |
|---|---|
| Features |
|
| RoHS Compliance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.13 | g/cm³ | ISO 1183 |
| Molding Shrinkage | ASTM D551 | ||
| Flow | 1.5 | % | |
| Across Flow | 2.1 | % |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore A) | 38 | ISO 48 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Yield) | 1.28 | MPa | ISO 37 |
| Tensile Elongation (Break) | 57 | % | ISO 37 |
| Tear Strength 1 | 14 | kN/m | ISO 34-1 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Heat | 1940 | J/kg/°C | ASTM E1461 |
| Thermal Conductivity | 5.0 | W/m/K | ASTM E1461 |
| Thermal Diffusivity | 0.0249 | cm²/s | ASTM E1461 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 65.0 | °C | |
| Drying Time | 1.0 to 2.0 | hr | |
| Rear Temperature | 175 to 190 | °C | |
| Middle Temperature | 190 to 205 | °C | |
| Front Temperature | 195 to 215 | °C | |
| Nozzle Temperature | 195 to 215 | °C | |
| Processing (Melt) Temp | 190 to 215 | °C | |
| Mold Temperature | 20.0 to 45.0 | °C | |
| Injection Pressure | 4.10 to 8.30 | MPa | |
| Injection Rate | Moderate-Fast | ||
| Holding Pressure | 1.40 to 4.10 | MPa | |
| Back Pressure | 0.00 to 0.700 | MPa | |
| Screw Speed | 50 to 150 | rpm |
| Note Message | |
|---|---|
| 1 . | Method Bb, Angle (Nicked) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| XAREC™ N WA 5030 | Idemitsu Kosan Co., Ltd. | SPS+Nylon | XAREC™ |
| Borealis PP BE170CF | Borealis AG | PP Copolymer | Borealis PP |
| Ingeo™ AW 240D | NatureWorks® LLC | PLA | Ingeo™ |
| Lucky Enpla LAY1001F SG | Lucky Enpla Co LTD | PC+ABS | Lucky Enpla |
| Plenco 03303 (Injection) | Plastics Engineering Co. | Phenolic | Plenco |
