Order Products : sales@su-jiao.com
Laprene® 8K1000A55
| Category: | SEBS , Styrene Ethylene Butylene Styrene Block Copolymer |
| Manufacturer: | SO.F.TER. SPA |
| Trademark: | Laprene® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | EYhnOQ_Laprene-8K1000A55.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Laprene® 8K1000A55 is a Styrene Ethylene Butylene Styrene Block Copolymer (SEBS) material. It is available in Europe, Latin America, or North America. Primary attribute of Laprene® 8K1000A55: REACH Compliant. Typical application of Laprene® 8K1000A55: Engineering/Industrial Parts |
| General Information | |
|---|---|
| Uses |
|
| Agency Ratings |
|
| Appearance |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.03 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 3 sec) | 55 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress 1(100% Strain) | 1.80 | MPa | ASTM D412 |
| Tensile Strength 2 | 10.8 | MPa | ASTM D412 |
| Tensile Elongation 3(Break) | 580 | % | ASTM D412 |
| Tear Strength 4 | 37.0 | kN/m | ASTM D624 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 80.0 | °C | |
| Drying Time | 2.0 | hr | |
| Rear Temperature | 210 | °C | |
| Middle Temperature | 220 | °C | |
| Front Temperature | 230 | °C | |
| Nozzle Temperature | 230 | °C | |
| Mold Temperature | 30.0 to 50.0 | °C |
| Note Message | |
|---|---|
| 1 . | Die C |
| 2 . | Die C |
| 3 . | Die C |
| 4 . | Die C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Malen E FGNX 23-D022 | LyondellBasell Industries | LDPE | Malen |
| Mirathane™ H580 | Miracll Chemicals Co., Ltd. | TPU, Unspecified | Mirathane™ |
| TOTAL Polyethylene XSene® HDPE XS 10 Orange YCF | TOTAL Refining & Chemicals | HDPE | TOTAL Polyethylene |
| UBESTA 3020 U | UBE Engineering Plastics, S.A. | Nylon 12 | UBESTA |
| DENILEN M 3015 | Vamp Tech | PP, Unspecified | DENILEN |
