Order Products : sales@su-jiao.com

ESENTTIA 60R45CD

Category:	PP Random Copolymer , Polypropylene Random Copolymer
Manufacturer:	Polipropileno del Caribe S.A.
Trademark:	ESENTTIA
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	EWRQGI_ESENTTIA-60R45CD.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

Characteristics: High melt flow rate control reologhy Random copolymer polypropylene with very good optical properties and easy mold filling; good impact resistance; with clarify and mold release additives.

Recommended for: Short cycles times injection molding thin walls articles with highly transparency and good impact resistance; injection molding of large or general purpose articles where contact transparency is required.

General Information
Additive	Clarifier Mold Release
Features	Controlled Rheology Fast Molding Cycle Food Contact Acceptable General Purpose Good Impact Resistance Good Mold Release High Clarity High Flow Opticals Random Copolymer
Uses	General Purpose Thin-walled Parts
Agency Ratings	EC 1907/2006 (REACH) EC 1935/2004 EC 2023/2006 EU 10/2011 FDA 21 CFR 177.1520(a)(3)(i)(c)(1) FDA 21 CFR 177.1520(b) FDA 21 CFR 177.1520(c) 3.1a
Appearance	Clear/Transparent
Forms	Pellets
Processing Method	Injection Molding

Physical	Nominal Value	Unit	Test Method
Melt Mass-Flow Rate (MFR) ¹(230°C/2.16 kg)	58	g/10 min	ASTM D1238

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength ²(Yield, 3.20 mm, Injection Molded)	26.2	MPa	ASTM D638
Tensile Elongation ³(Yield, 3.20 mm, Injection Molded)	14	%	ASTM D638
Flexural Modulus - 1% Secant ⁴(3.20 mm, Injection Molded)	931	MPa	ASTM D790A

Impact	Nominal Value	Unit	Test Method
Notched Izod Impact (23°C, 3.20 mm, Injection Molded)	75	J/m	ASTM D256A
Gardner Impact ⁵(23°C, 3.20 mm, Injection Molded)	27.1	J	ASTM D5420

Note Message
1 .	Procedure B
2 .	Type I, 50 mm/min
3 .	Type I, 50 mm/min
4 .	Type I, 1.3 mm/min
5 .	Method A

Resin Grade	Manufacturer	Category	Trademark
PONYL 4001G30	POLYROCKS CHEMICAL CO., LTD	Nylon 66	PONYL
3M™ Dyneon™ Fluoroplastic PFA 8502ESDZ	3M Advanced Materials Division	PFA	3M™ Dyneon™ Fluoroplastic
Chemlon® 109-18 GH	Teknor Apex Company (Chem Polymer)	Nylon 66	Chemlon®
FORMULA P COMP 3220	Putsch Kunststoffe GmbH	PP, Unspecified	FORMULA P
ELIX™ ABS M305	ELIX Polymers, S. L.	ABS	ELIX™ ABS