Order Products : sales@su-jiao.com
CERTENE™ PHM-35AN
| Category: | PP Homopolymer , Polypropylene Homopolymer |
| Manufacturer: | Muehlstein |
| Trademark: | CERTENE™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | EVvd15_CERTENE-PHM-35AN.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| PHM-35AN is a certified prime grade Nucleated Polypropylene designed for injection molding of lightweight and thin-walled articles. PHM-35AN contains antistatic and offers good balance of high flow processability with high contact clarity, good tensile strength, short cycling, excellent dimensional stability, and good surface finishing. PHM-35AN applications include intricate long-flow path designs, multi-cavity parts, caps, closures, housewares, containers and toys. PHM-35AN processing temperature is between 220° to 240°C with mold at 20°-50°C. PHM-35AN complies with FDA regulation 21CFR 177.1520 and most international regulations concerning Polypropylene use in contact with food. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.903 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 35 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale) | 83 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Yield, Injection Molded) | 32.0 | MPa | ASTM D638 |
| Tensile Elongation 2(Yield, Injection Molded) | 12 | % | ASTM D638 |
| Flexural Modulus - 1% Secant 3(Injection Molded) | 1170 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C, Injection Molded) | 32 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed, Injection Molded) | 93.0 | °C | ASTM D648 |
| Vicat Softening Temperature | 152 | °C | ASTM D1525 |
| Additional Information |
|---|
| All specimens were injection molded according to ASTM D2146 Type 1. |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 220 - 240 | °C | |
| Mold Temperature | 20.0 - 50.0 | °C |
| Note Message | |
|---|---|
| 1 . | 50 mm/min |
| 2 . | 50 mm/min |
| 3 . | 1.3 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TAROMID B 280 G2 X0 | Taro Plast S.p.A. | Nylon 6 | TAROMID B |
| NatureFlex™ 400NPU | Innovia Films Ltd. | Cellulose, Regenerated | NatureFlex™ |
| CYCOLAC™ INP630 resin | SABIC Innovative Plastics | ABS+SAN | CYCOLAC™ |
| Hanwha Total PP TH52 | HANWHA TOTAL PETROCHEMICALS Co., Ltd. | PP, High Crystal | Hanwha Total PP |
| LNP™ LUBRICOMP™ DFL12 compound | SABIC Innovative Plastics Asia Pacific | PC | LNP™ LUBRICOMP™ |
