Order Products : sales@su-jiao.com
PRIMALLOY® A1606
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | Mitsubishi Chemical Performance Polymers, Inc. |
| Trademark: | PRIMALLOY® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | ERK4QG_PRIMALLOY-A1606.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| PRIMALLOY® A1606 is a Thermoplastic Elastomer (TPE) material. It is available in Asia Pacific, Europe, or North America. |
| General Information |
|---|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.00 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 3.2 | g/10 min | ISO 1133 |
| Molding Shrinkage 1 | Internal Method | ||
| Across Flow : 2.00 mm | 0.80 | % | |
| Flow : 2.00 mm | 1.8 | % |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore A) | 69 | ISO 7619 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Break) | 10.0 | MPa | ISO 37 |
| Tensile Elongation (Break) | 750 | % | ISO 37 |
| Compression Set 2(70°C, 22 hr) | 60 | % | ISO 815 |
| Note Message | |
|---|---|
| 1 . | 120x120x2 mm test plaque |
| 2 . | 6 sheets (each thickness = 2mm) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| MARPOL® LDM 740 | Marco Polo International, Inc. | LDPE | MARPOL® |
| WONDERLITE® PC-6710 | CHI MEI CORPORATION | PC | WONDERLITE® |
| Xuchuan A-7160/B-8260 | Xuchuan Chemical (Suzhou) Co., Ltd | TPU-Polyester | Xuchuan |
| ASTALAC™ ABS M76 | Marplex Australia Pty. Ltd. | ABS | ASTALAC™ |
| EPLAMID 6 CFR 20 NC | EPSAN Plastik SAN. ve TiC. A.S. | Nylon 6 | EPLAMID 6 |
