Order Products : sales@su-jiao.com
PENTALLOY BP GV30 H natural
| Category: | Nylon 6+PP , Polyamide 6 + PP |
| Manufacturer: | PENTAC Polymer GmbH |
| Trademark: | PENTALLOY BP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | EPbbQh_PENTALLOYBPGV30Hnatural.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| PA6+PP-alloy, 30% glass fiber reinforced, heat stabilised, resistant to corrosion |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Additive |
|
| Features |
|
| Agency Ratings |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Density | 1.26 | -- | g/cm³ | ISO 1183 |
| Molding Shrinkage | ISO 294-4 | |||
| Transverse flow | 0.80 | -- | % | ISO 294-4 |
| Flow | 0.40 | -- | % | ISO 294-4 |
| Water Absorption | ISO 62 | |||
| Saturated, 23°C | 3.5 | -- | % | ISO 62 |
| Equilibrium, 23°C, 50% RH | 1.0 | -- | % | ISO 62 |
| Mechanical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Tensile Modulus | 9300 | 7200 | MPa | ISO 527-2/1 |
| Tensile Stress (Break) | 135 | 100 | MPa | ISO 527-2/5 |
| Tensile Strain (Break) | 2.4 | 3.8 | % | ISO 527-2/5 |
| Impact | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Charpy Notched Impact Strength | ISO 179/1eA | |||
| -30°C | 12 | -- | kJ/m² | ISO 179/1eA |
| 23°C | 15 | 16 | kJ/m² | ISO 179/1eA |
| Charpy Unnotched Impact Strength | ISO 179/1eU | |||
| -30°C | 50 | -- | kJ/m² | ISO 179/1eU |
| 23°C | 60 | 62 | kJ/m² | ISO 179/1eU |
| Thermal | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Heat Deflection Temperature | ||||
| 0.45 MPa, not annealed | 210 | -- | °C | ISO 75-2/B |
| 1.8 MPa, not annealed | 195 | -- | °C | ISO 75-2/A |
| Melting Temperature | 222 | -- | °C | ISO 11357-3 |
| Flammability | Dry | Conditioned | Test Method | |
|---|---|---|---|---|
| Flame Rating | UL 94 | |||
| 1.6 mm | HB | -- | UL 94 | |
| 3.2 mm | HB | -- | UL 94 |
| Injection | Dry | Unit | |
|---|---|---|---|
| Drying Temperature | 80 | °C | |
| Drying Time | 3.0 | hr | |
| Suggested Max Moisture | 0.050 - 0.13 | % | |
| Suggested Max Regrind | 20 | % | |
| Rear Temperature | 245 - 270 | °C | |
| Middle Temperature | 250 - 275 | °C | |
| Front Temperature | 255 - 265 | °C | |
| Processing (Melt) Temp | 240 - 280 | °C | |
| Mold Temperature | 40 - 80 | °C | |
| Injection Pressure | 50.0 | MPa | |
| Screw L/D Ratio | 18.0:1.0 to 22.0:1.0 | ||
| Screw Compression Ratio | 2.2:1.0 to 2.8:1.0 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Tenac™-C 4520 | Asahi Kasei Chemicals Corporation | Acetal (POM) Copolymer | Tenac™-C |
| Flexiblend® PP-1300 | Colour Image Plastic Compound Sdn. Bhd. (CIPC) | PP+EPDM | Flexiblend® |
| LONGLITE® LCP LCP-300 B3G | CCP Group | LCP | LONGLITE® LCP |
| Lupoy® 1603-03 | LG Chem Ltd. | PC | Lupoy® |
| PENTAMID A GV15 MK15 H RC schwarz | PENTAC Polymer GmbH | Nylon 66 | PENTAMID A |
