Order Products : sales@su-jiao.com
Pebax® MV 2080
| Category: | PEBA-Ether , Polyether Block Amide |
| Manufacturer: | Arkema |
| Trademark: | Pebax® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | EOnvbC_Pebax-MV-2080.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Polyether block amide Pebax® MV 2080 is a thermoplastic elastomer made of flexible polyether and rigid polyamide. Pebax ® MV 2080 is an inherently dissipative polymer and can be dry blended or compounded with a polymer matrix to lower the surface resistivity of the final part. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.07 | g/cm³ | ISO 1183 |
| Water Absorption | ISO 62 | ||
| 23°C, 24 hr | 48 | % | |
| Equilibrium, 23°C, 50% RH | 1.4 | % |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore D) | 40 | ISO 868 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Break) | 30.0 | MPa | ASTM D638 |
| Tensile Elongation (Break) | > 700 | % | ASTM D638 |
| Flexural Modulus | 80.0 | MPa | ISO 178 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Melting Temperature | 160 | °C | ISO 11357-3 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity | 1.0E+7 | ohms | IEC 60093 |
| Volume Resistivity | 1.0E+7 | ohms·cm | IEC 60093 |
| Charge Decay Time | < 1.0 | sec | MIL B-81705 |
| Optical | Nominal Value | Test Method | |
|---|---|---|---|
| Refractive Index | 1.502 | Internal Method |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 65.0 to 75.0 | °C | |
| Drying Time | 4.0 to 6.0 | hr | |
| Processing (Melt) Temp | 200 to 270 | °C | |
| Mold Temperature | 25.0 to 60.0 | °C |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 65.0 to 75.0 | °C | |
| Drying Time | 4.0 to 6.0 | hr | |
| Melt Temperature | 210 to 230 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP ESD C 702 | RTP Company | HDPE | RTP |
| TEDUR® L 9107-1 S | ALBIS PLASTIC GmbH | PPS | TEDUR® |
| Exxtral™ Performance Polyolefin BNU013 | ExxonMobil Chemical | TPO | Exxtral™ Performance Polyolefin |
| Geon™ Vinyl Dry Blend E3360A | PolyOne Corporation | PVC, Rigid | Geon™ Vinyl Dry Blend |
| Jiangsu Sinarise JM9013 | Jiangsu Sinarise New Material Technology Co., Ltd | TPE | Jiangsu Sinarise |
