Order Products : sales@su-jiao.com
MAJ'ECO EWFR200BS 9445 WHITE 3
| Category: | Biodeg Polymers , Biodegradable Polymers |
| Manufacturer: | AD majoris |
| Trademark: | MAJ'ECO |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | ENlDyY_MAJ-ECO-EWFR200BS-9445-WHITE-3.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
MAJ'ECO EWFR200BS 9445 WHITE 3 is a biopolymer compound intended for injection moulding. MAJ'ECO EWFR200BS 9445 WHITE 3 has been developed especially for demanding applications in various engineering sectors. APPLICATIONS Product such as:
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.29 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (190°C/5.0 kg) | 17 | g/10 min | ISO 1133 |
| Molding Shrinkage (2.00 mm) | 0.45 - 0.78 | % | Internal method |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 4750 | MPa | ISO 527-2/1 |
| Tensile Stress (Break) | 48.0 | MPa | ISO 527-2/50 |
| Tensile Strain (Break) | 4.9 | % | ISO 527-2 |
| Flexural Modulus 1 | 3750 | MPa | ISO 178 |
| Flexural Stress | 84.0 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength (23°C) | 5.0 | kJ/m² | ISO 179/1eA |
| Charpy Unnotched Impact Strength (23°C) | 24 | kJ/m² | ISO 179/1eU |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature (0.45 MPa, Unannealed) | 150 | °C | ISO 75-2/B |
| Ball Pressure Test (125°C) | Pass | NF C 61-303 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Glow Wire Flammability Index | IEC 60695-2-12 | ||
| 1.00 mm | 825 | °C | IEC 60695-2-12 |
| 2.00 mm | 825 | °C | IEC 60695-2-12 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 80.0 | °C | |
| Drying Time | 3.0 | hr | |
| Processing (Melt) Temp | 150 - 180 | °C | |
| Mold Temperature | 30.0 - 50.0 | °C | |
| Injection Rate | Moderate |
| Injection instructions |
|---|
| Holding pressure: 50 to 70% of the injection pressure |
| Note Message | |
|---|---|
| 1 . | 2.0 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SABIC® PPcompound 7795 | Saudi Basic Industries Corporation (SABIC) | PP, Unspecified | SABIC® PPcompound |
| Celstran® PP-GF20-23 Natural | Celanese Corporation | PP, Unspecified | Celstran® |
| Ferro PP TPP40AC52BK | Ferro Corporation | PP Homopolymer | Ferro PP |
| Gallonprene® GP210-9002L | Shenzhen Sungallon Rubber & Plastic Corporation Limited | TPE | Gallonprene® |
| EpoxAcast® 670 HT | Smooth-On, Inc | Epoxy | EpoxAcast® |
