Order Products : sales@su-jiao.com

Devcon Korrobond 95

Category:	Epoxy , Epoxy; Epoxide
Manufacturer:	Devcon
Trademark:	Devcon
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	EL3i5o_Devcon-Korrobond-95.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

Korrobond 95 is a two-component epoxy based backing compound and damping material for stone crushers. It serves as a backing and reinforcing layer between machine parts and as a damper when subjected to impact and shock loads.

Features:

Very high compressive strength

100% Solids, no solvents, minimum shrinkage

Easy to mix and pour

High impact strength and resilience

Ideal for extremely cold environments

General Information
Features	Good Compressive Strength High Impact Resistance Low Temperature Resistant Resilient

Physical	Nominal Value	Unit	Test Method
Density	1.66	g/cm³
Molding Shrinkage - Flow	0.060	%

Hardness	Nominal Value	Unit	Test Method
Durometer Hardness (Shore D)	85		ASTM D2240

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength	36.5	MPa	ASTM D638
Compressive Strength	93.1	MPa	ASTM D695

Impact	Nominal Value	Unit	Test Method
Impact Resistance - Side	4.63	J

Additional Information	Nominal Value	Unit	Test Method
Lap Shear	8.13	MPa	ASTM D1002

Thermoset	Nominal Value	Unit	Test Method
Thermoset Components
Hardener	Mix Ratio by Volume: 1.0
Resin	Mix Ratio by Volume: 10
Pot Life	56	min
Shelf Life	100	wk
Thermoset Mix Viscosity	10300	cP

Resin Grade	Manufacturer	Category	Trademark
SLOVALEN® PH 76 T 20 FRD 5	Plastcom	PP, Unspecified	SLOVALEN®
ALTECH® PA6 A 1000/109 BK1011-13LSC	ALBIS PLASTIC GmbH	Nylon 6	ALTECH® PA6
Chemraz XRZ	Greene, Tweed & Co.	Perfluoroelastomer	Chemraz
Eastar™ GN119	Eastman Chemical Company	PETG	Eastar™
Petrothene® NA206000 (Injection Molding)	LyondellBasell Industries	LDPE	Petrothene®