Order Products : sales@su-jiao.com

Daelim Po1y® VL0003 Shoe Sole

Category:	Plastomer , Ethylene-based Plastomer
Manufacturer:	DAELIM INDUSTRIAL CO., LTD.
Trademark:	Daelim Po1y®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	EG6OBN_DaelimPo1yVL0003ShoeSole.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

Daelim Po1y®VL0003 Shoe Sole is a vinyl plastic product,. It is available in Europe or Asia Pacific. Daelim Po1y®VL0003 Shoe Sole's application areas include consumer goods and food contact applications.

Features include:

Good processability

Antioxidants

Good tear strength

Wear-resistant

Heat resistance

General Information
Additive	Antioxidation
Features	Low density Antioxidation Workability, good Good heat aging resistance Good tear strength Good wear resistance The smell is low to none
Uses	Footwear
Agency Ratings	FDA 21 CFR 177.1520

Physical	Nominal Value	Unit	Test Method
Density	0.900	g/cm³	ASTM D1505
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)	3.0	g/10 min	ASTM D1238

Hardness	Nominal Value	Unit	Test Method
Durometer Hardness			ASTM D2240
Shore A, Molded	86		ASTM D2240
Shore D, Molded	40		ASTM D2240

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength (Break, Compression Molded)	30.4	MPa	ASTM D638
Tensile Elongation (Break, Compression Molded)	800	%	ASTM D638
Flexural Modulus (Compression Molded)	68.6	MPa	ASTM D790

Elastomers	Nominal Value	Unit	Test Method
Tear Strength	73.5	kN/m	ASTM D624

Thermal	Nominal Value	Unit	Test Method
Vicat Softening Temperature	82.0	°C	ASTM D1525
Peak Melting Temperature	86.0 - 97.0	°C	ASTM D3418

Injection	Nominal Value	Unit
Processing (Melt) Temp	90 - 100	°C

Resin Grade	Manufacturer	Category	Trademark
Prixene® EL020E20	POLYMAT	LLDPE	Prixene®
MEGOLON™ IN200	AlphaGary	TP, Unspecified	MEGOLON™
VAMPCARB 0024 V0	Vamp Tech	PC	VAMPCARB
FRAGOM PR/11	Crosspolimeri S.p.A.	Polyolefin, Unspecified	FRAGOM
POLYabs SN0	Polykemi AB	ABS	POLYabs