Order Products : sales@su-jiao.com
DAI-EL™ LT-271
| Category: | Fluorelastomer , Fluoroelastomer |
| Manufacturer: | DAIKIN AMERICA, INC. |
| Trademark: | DAI-EL™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | EAf3CI_DAI-EL-LT-271.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| DAI-EL LT-271 is a terpolymer suitable for various peroxide cure systems. LT-271 can be formulated to eliminate the post cure process. LT-271 is designed for transfer and compression molding applications that require a balance between good low temperature flexibility and fuel resistance. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.82 | g/cm³ | ASTM D792 |
| Mooney Viscosity (ML 1+10, 121°C) | 30 | MU | ASTM D1646 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 71 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (100% Strain) | 2.80 | MPa | ASTM D412 |
| Tensile Strength (Yield) | 18.0 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 330 | % | ASTM D412 |
| Compression Set (200°C, 70 hr) | 30 | % | ASTM D395 |
| Aging | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Change in Tensile Strength in Air | ASTM D573 | ||
| 200°C, 70 hr | -5.0 | % | ASTM D573 |
| 230°C, 70 hr | -31 | % | ASTM D573 |
| Change in Ultimate Elongation in Air | ASTM D573 | ||
| 200°C, 70 hr | -7.0 | % | ASTM D573 |
| 230°C, 70 hr | 0.0 | % | ASTM D573 |
| Change in Durometer Hardness in Air | ASTM D573 | ||
| Support a, 200°C, 70 hr | 1.0 | ASTM D573 | |
| Support a, 230°C, 70 hr | 1.0 | ASTM D573 |
| Additional Information |
|---|
| All tests performed were performed under DAIKIN test methodsFluorine Content: 66%Curing characteristic, Measuring Temperature: 160°CCuring characteristic, Curelastomer: 2.7 minCuring characteristic, Measuring Temperature: 177°CCuring characteristic, Curelastomer: 0.9 minTR test, TR10: -27°C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TEDUR® L 9424-1 | ALBIS PLASTIC GmbH | PPS | TEDUR® |
| Exelene® LDPE 8000 | Montachem International, Inc. | LDPE | Exelene® LDPE |
| Haysite BMC 18600 | Haysite Reinforced Plastics | Polyester, TS | Haysite BMC |
| POFEX EP8300S 85M | POLYROCKS CHEMICAL CO., LTD | TPU, Unspecified | POFEX |
| ESTOPLAST XU 6250BB10 | Ester Industries Ltd. | Nylon 66 | ESTOPLAST XU |
