Order Products : sales@su-jiao.com

Fluon® PTFE CD123E

Category:	PTFE , Polytetrafluoroethylene
Manufacturer:	Asahi Glass Co., Ltd.
Trademark:	Fluon®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	E8FUGN_Fluon-PTFE-CD123E.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
The E Series contains none of the PFOA compound (ammonium salt) used as a conventional PTFE polymerizable emulsifier. The CD Grade products are new, environmentally compatible PTFE fine powders offering all the characteristics of the conventional PTFE, without containing PFOA. The CD grade products can be used in seal tapes, stretch films, tubes, small diameter rods, electrical wire coatings, etc., by paste extrusion with an aid. The CD grade products are easily fibrillated by the application of shearing force. They can therefore be used as flame retardant additives to improve the melt tension of thermoplastic resin. Only very small amounts confer the flame retardant effects. Applications: Electrical tapes Pipes Hoses Characteristics: High strength Low RR

Message

The E Series contains none of the PFOA compound (ammonium salt) used as a conventional PTFE polymerizable emulsifier. The CD Grade products are new, environmentally compatible PTFE fine powders offering all the characteristics of the conventional PTFE, without containing PFOA.

The CD grade products can be used in seal tapes, stretch films, tubes, small diameter rods, electrical wire coatings, etc., by paste extrusion with an aid.
The CD grade products are easily fibrillated by the application of shearing force. They can therefore be used as flame retardant additives to improve the melt tension of thermoplastic resin. Only very small amounts confer the flame retardant effects.

Applications:

Electrical tapes

Pipes

Hoses

Characteristics:

High strength

Low RR

General Information
Features	High molecular weight High strength Homopolymer Good stretchability
Uses	Strap Electrical/Electronic Applications Pipe Piping system Pipe fittings
Forms	Powder

Physical	Nominal Value	Unit
Specific Gravity	2.16	g/cm³
Apparent Density	0.55	g/cm³

Additional Information	Nominal Value	Unit	Test Method
Extrusion Pressure ¹	2.30		Internal method
Median Particle Size	500.0	µm
Reduction Ratio	25.0 - 300

Note Message
1 .	20° die angle, 16% ISOPAR H, and RR=1000

Resin Grade	Manufacturer	Category	Trademark
D-MEC SCR802	D-MEC Ltd.	Epoxy	D-MEC
Elastollan® S 85 A	BASF Polyurethanes GmbH	TPU-Polyester	Elastollan®
Geon™ Vinyl Flexible XV3900	PolyOne Corporation	PVC, Flexible	Geon™ Vinyl Flexible
LNP™ THERMOCOMP™ D351 compound	SABIC Innovative Plastics Asia Pacific	PC	LNP™ THERMOCOMP™
MAJORIS G407	AD majoris	PP, Unspecified	MAJORIS