Order Products : sales@su-jiao.com

Unichem 9066G-015

Category:	PVC, Unspecified , Polyvinyl Chloride
Manufacturer:	Colorite Polymers
Trademark:	Unichem
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	E83NGd_Unichem-9066G-015.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Unichem 9066G-015 is a clear, non-toxic, semi-rigid, vinyl compound formulated specifically for the injection molding of components for the medical and food industries. This compound is based on a Citrate plasticizer. This compound is designed to resist discoloration and degradation when subjected to gamma ray sterilization. The U.S. Food and Drug Administration sanction all components used in the manufacture of Unichem 9066G-015 for food applications under Title 21 of the Code of Federal Regulations. To comply with the exacting needs of the medical industry, complete traceability and lot identification of all components and finished products are maintained.

Message

Unichem 9066G-015 is a clear, non-toxic, semi-rigid, vinyl compound formulated specifically for the injection molding of components for the medical and food industries. This compound is based on a Citrate plasticizer. This compound is designed to resist discoloration and degradation when subjected to gamma ray sterilization.

The U.S. Food and Drug Administration sanction all components used in the manufacture of Unichem 9066G-015 for food applications under Title 21 of the Code of Federal Regulations.

To comply with the exacting needs of the medical industry, complete traceability and lot identification of all components and finished products are maintained.

General Information
Features	Food Contact Acceptable Good Color Stability Non-Toxic Radiation Sterilizable Semi Rigid
Uses	Food Service Applications Medical/Healthcare Applications
Agency Ratings	FDA Food Contact, Unspecified Rating
Appearance	Clear/Transparent
Forms	Pellets
Processing Method	Injection Molding

Physical	Nominal Value	Unit	Test Method
Specific Gravity	1.29	g/cm³	ASTM D792

Hardness	Nominal Value	Unit	Test Method
Durometer Hardness (Shore A)	90		ASTM D2240

Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus - 100% Secant	15.2	MPa	ASTM D638
Tensile Strength (Yield)	22.1	MPa	ASTM D638
Tensile Elongation (Yield)	280	%	ASTM D638

Thermal	Nominal Value	Unit	Test Method
Brittleness Temperature	-15.0	°C	ASTM D746

Resin Grade	Manufacturer	Category	Trademark
REXtac® APAO RT 1215	Huntsman Corporation	PAO	REXtac® APAO
Chemlon® 109-18 GH	Teknor Apex Company (Chem Polymer)	Nylon 66	Chemlon®
Ebalta AH 110 / TL	Ebalta Kunststoff GmbH	Epoxy	Ebalta
LNP™ LUBRICOMP™ WP004 compound	SABIC Innovative Plastics	PBT	LNP™ LUBRICOMP™
LEXAN™ 123 resin	SABIC Innovative Plastics	PC	LEXAN™