Order Products : sales@su-jiao.com
ESENTTIA 130C80ND
| Category: | PP Impact Copolymer , Polypropylene Impact Copolymer |
| Manufacturer: | Polipropileno del Caribe S.A. |
| Trademark: | ESENTTIA |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | E7gW4B_ESENTTIA-130C80ND.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Characteristics: Very high flow rate control reologhy Impact block copolymer polypropylene; good impact/stiffness balance; ease of processing allows increased design freedom and higher productivity; excellent dimensional stability; good surface finish color; with nucleant and mold release additives. Recommended for: Injection molding of thin complex parts; housewares and consumer products. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Melt Mass-Flow Rate (MFR) 1(230°C/2.16 kg) | 130 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 2(Yield, 3.20 mm, Injection Molded) | 23.8 | MPa | ASTM D638 |
| Tensile Elongation 3(Yield, 3.20 mm, Injection Molded) | 5.0 | % | ASTM D638 |
| Flexural Modulus - 1% Secant 4(3.20 mm, Injection Molded) | 1140 | MPa | ASTM D790A |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C, 3.20 mm, Injection Molded) | 53 | J/m | ASTM D256A |
| Gardner Impact 5 | ASTM D5420 | ||
| -30°C, 3.20 mm, Injection Molded | 10.2 | J | |
| 23°C, 3.20 mm, Injection Molded | 20.3 | J |
| Note Message | |
|---|---|
| 1 . | Procedure B |
| 2 . | Type I, 50 mm/min |
| 3 . | Type I, 50 mm/min |
| 4 . | Type I, 1.3 mm/min |
| 5 . | Method A |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Cevian®-N GRSJ3 | Daicel Polymer Ltd. | SAN | Cevian®-N |
| CONTINUUM™ DMDC-1250 NT 7 | The Dow Chemical Company | HDPE | CONTINUUM™ |
| GAPEX® RPP20EU84AL | Ferro Corporation | PP, Unspecified | GAPEX® |
| Enviramid® N1340MHL BK | Ravago Manufacturing Americas, LLC | Nylon 66 | Enviramid® |
| POLYFLAM® RPC 40400 | A. Schulman Europe | PC | POLYFLAM® |
