Order Products : sales@su-jiao.com

ESENTTIA 01H45

Category:	PP Homopolymer , Polypropylene Homopolymer
Manufacturer:	Polipropileno del Caribe S.A.
Trademark:	ESENTTIA
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	E5gGHN_ESENTTIA-01H45.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message
Characteristics: Low melt flow rate Homopolymer polypropylene with excellent mechanical properties and color, excellent gage control and high melt strength. Recommended for: Extrusion of strapping, sheets, Cartonplast, extrusion thermoforming, extrusion blow molding of bottles, injection molding of heels, extrusion and injection molding general purpose applications.

General Information
Features	Food Contact Acceptable General Purpose Good Gauge Control Good Melt Strength Homopolymer Low Flow
Uses	Bottles Footwear General Purpose Sheet Strapping
Agency Ratings	EC 1907/2006 (REACH) EC 1935/2004 EC 2023/2006 EU 10/2011 FDA 21 CFR 177.1520(a)(3)(i)(c)(1) FDA 21 CFR 177.1520(b) FDA 21 CFR 177.1520(c) 3.1a
Forms	Pellets
Processing Method	Extrusion Extrusion Blow Molding Injection Molding Sheet Extrusion Thermoforming

Physical	Nominal Value	Unit	Test Method
Melt Mass-Flow Rate (MFR) ¹(230°C/2.16 kg)	0.65	g/10 min	ASTM D1238

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength ²(Yield, 3.20 mm, Injection Molded)	33.4	MPa	ASTM D638
Tensile Elongation ³(Yield, 3.20 mm, Injection Molded)	11	%	ASTM D638
Flexural Modulus - 1% Secant ⁴(3.20 mm, Injection Molded)	1380	MPa	ASTM D790A

Impact	Nominal Value	Unit	Test Method
Notched Izod Impact (23°C, 3.20 mm, Injection Molded)	56	J/m	ASTM D256A

Note Message
1 .	Procedure B
2 .	Type I, 50 mm/min
3 .	Type I, 50 mm/min
4 .	Type I, 1.3 mm/min

Resin Grade	Manufacturer	Category	Trademark
Texalan® 6 Series 670A	Austin Novel Materials Co. Ltd.	TPU-Ester/Ether	Texalan® 6 Series
4MID® 9A22325	4Plas	Nylon 66	4MID®
Arnite® B600 SNF	DSM Engineering Plastics	PBT	Arnite®
LUBEMID A26 NATURAL	LUBEN PLAST srl	Nylon 66	LUBEMID
ULTEM™ 2312 resin	SABIC Innovative Plastics	PEI	ULTEM™