Order Products : sales@su-jiao.com
Epolene® E-43P
| Category: | PP, Unspecified , Polypropylene |
| Manufacturer: | Westlake Chemical Corporation |
| Trademark: | Epolene® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | E3Y40w_Epolene-E-43P.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Epolene E-43P is a maleic anhydride grafted polypropylene powder recommended as a coupling agent for polypropylene (PP) composites and for providing slip resistance in floor finish emulsions. Because of the polarity and anhydride functionality, Epolene E-43P is useful for laminating, as a compatibilizer for PP blends with nylon or EVOH, and for enhancing the strength of composites that utilize reinforcements / fillers such as glass, talc, calcium carbonate, and metals. |
| General Information | |
|---|---|
| Uses |
|
| Forms |
|
| Physical | Nominal Value | Unit | |
|---|---|---|---|
| Acid Number | 45.00 | mg KOH/g | |
| Molecular Weight 1 | 9100 |
| Thermal | Nominal Value | Unit | |
|---|---|---|---|
| Softening Point - Mettler | 158 | °C |
| Fill Analysis | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Melt Viscosity (125°C) | Solid at this temp. |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Penetration Hardness 2(25°C) | < 100 | mm | ASTM D5 |
| Fill Analysis | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Melt Viscosity (190°C) | 300 | mPa·s |
| Note Message | |
|---|---|
| 1 . | Molecular weight measured via Gel Permeation Chromatography (GPC) using polystyrene standards |
| 2 . | Needle under 100-g load for 5s, tenths of mm |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sindustris PBT GP2401G | Sincerity Australia Pty Ltd. | PBT | Sindustris PBT |
| AKROMID® C3 GF 50 1 black (4401) | AKRO-PLASTIC GmbH | Nylon 66/6 | AKROMID® |
| EXCELLOY CKF10 | Techno Polymer Co, Ltd. | PC+ABS | EXCELLOY |
| ESTADIENE 0835 GF | Cossa Polimeri S.r.l. | ABS | ESTADIENE |
| StarFlex® 7393-1002 | Star Thermoplastic Alloys & Rubbers, Inc. | TPE | StarFlex® |
